Yamaha RX-V463 owner manual 87 En, Remote control, Resetting the system

Page 91

Troubleshooting

■Remote control

Problem

Cause

Remedy

See

page

 

 

 

The remote control

Wrong distance or angle.

The remote control functions within a maximum

23

does not work nor

 

range of 6 m (20 ft) and no more than 30 degrees

 

function properly.

 

off-axis from the front panel.

 

 

 

 

 

 

Direct sunlight or lighting (from an

Reposition this unit.

—

 

inverter type of fluorescent lamp, etc.) is

 

 

 

striking the remote control sensor of this

 

 

 

unit.

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries.

3

 

 

 

 

 

The remote control code is not correctly

Set the remote control code correctly using “List of

75

 

set.

remote control codes” at the end of this manual.

 

 

 

 

 

 

 

Try setting another code for the same manufacturer

75

 

 

using “List of remote control codes” at the end of this

 

 

 

manual.

 

 

 

 

 

Even if the remote control code is correctly set, there are some models that do not respond to the remote control.

■Resetting the system

Use this feature to reset all the parameters of this unit to the initial factory settings.

1Press A STANDBY/ON on the front panel to set this unit to the standby mode.

2Press and hold K TONE CONTROL and then press A STANDBY/ON to turn on this

unit.

The advanced setup menu appears in the front panel display.

3Press L PROGRAM l / h to select “INIT.”.

4Press M STRAIGHT repeatedly to select “RESET”.

Select “CANCEL” to cancel the initialization procedure without making any changes.

5Press A STANDBY/ON to confirm your selection and set this unit to the standby mode.

Notes

•This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. However, the advanced setup menu parameters will not be initialized.

•The initial factory settings are activated next time you turn on this unit.

y

To cancel the initialization procedure at any time without making any changes, press M STRAIGHT repeatedly to select “CANCEL” and then press A STANDBY/ON.

INFORMATION

ADDITIONAL

 

 

English

87 En

Page 90 Page 92
Image 91
Page 90 Page 92
Contents RX-V463 Important Safety Instructions Example of Antenna Grounding FCC Information for US customersSerial No For Canadian CustomersContents Features We Want You Listening For a Lifetime Supplied accessoriesInstalling batteries in the remote control Getting startedPress Scene 1 button Enjoy DVD playback Set up your speakersQuick start guide Preparation Check the itemsSurround speakers Front and center speakersFor further connections Check the type of the connected speakers Default assigned Scene templatesPress Scene 1 button About Scene functionWhat do you want to do with this unit? A. model ConnectionsRear panel Name10 En Placing speakersSurround speakers Right Left Connecting speakers11 En Front B terminalsConnecting to the Speaker terminals Before connecting to the Speakers Terminal12 En Video jacks Information on jacks and cable plugs13 En Audio jacksInformation on Hdmi Audio and video signal flow14 En 15 En Connecting video componentsDVD player Connecting other componentsConnecting a DVD player 16 EnPVR or VCR Connecting a DVD recorder, PVR or VCRConnecting a set-top box 17 En18 En Connecting audio componentsConnecting a CD player and a CD recorder/MD recorder Connecting a multi-format player or an external decoder19 En Using the Video AUX jacks on the front panelPlayer 20 En Connecting the FM and AM antennasConnecting the power cable Connecting the wire of the AM loop antenna21 En Setting the speaker impedanceTurning on and off the power Set this unit to the standby mode22 En Front panel display23 En Using the remote controlUsing Auto Setup Optimizing the speaker setting for your listening room24 En 25 En Speaker level LVL 26 EnNumber of speakers SP Speaker distance DistIf Warning appears If an error screen appearsPress 8n and then press 8l / h to select SET or Cancel 27 EnSelected Scene template is assigned to the button Selecting the Scene templatesSelecting the desired Scene template 28 EnWhich Scene template would you like to select? 29 EnVideo games AUX Game Playing 30 En Preset Scene templates descriptionsRenaming the Scene templates Customizing the preset Scene TemplatesCreating your original Scene templates 31 EnControlling the input source Components in the Scene mode Using remote control on the Scene feature32 En 33 En Quick guide to contentsPlayback Basic operationsSelecting the Multi CH Input component Selecting audio input jacks34 En Current status screen appears in the OSD Using your headphonesMuting the audio output 35 EnVideo information Displaying the input source information36 En Audio information37 En Using the sleep timerSound field program descriptions Sound field programs38 En Enjoying unprocessed input sources Straight decoding mode Enjoying 2-channel sources using Standard decoders39 En Editing sound fields parameters 40 EnEnjoying high quality sound Using audio featuresAdjusting the tonal quality Adjusting the speaker level42 En Selecting the night listening modeLights up FM/AM tuningAutomatic tuning Manual tuning 43 EnManual preset tuning Automatic preset tuning44 En Press and hold BPRESET/TUNING for more than 3 seconds Selecting preset stationsExchanging preset station See Selecting preset stations on thisXM Ready legal disclaimer XM Satellite Radio tuning46 En XM Satellite Radio online informationBasic XM Satellite Radio operations Activating XM Satellite Radio47 En Direct Number Access mode All Channel Search modeCategory Search mode Preset Search modePreset channel number appears in the front panel display Setting XM Satellite Radio preset channels49 En 50 En Displaying the XM Satellite Radio informationDisplaying the XM Satellite Radio information in the OSD Sirius Satellite Radio legal disclaimer Sirius Satellite Radio tuningConnecting the SiriusConnect tuner 51 EnDisplaying the Sirius ID of your SiriusConnect tuner Activating Sirius Satellite Radio subscriptionBasic Sirius Satellite Radio operations 52 EnPRESET/TUNING/CH l/ hor 8PRESET/CH k/ n PRESET/TUNING/CH l/ h or 8PRESET/CH k/ n53 En 54 En Setting the Parental LockSetting the code number and the locked Channels PRESET/TUNING/CH l/ h or 8PRESET/CH k/ nPress 8ENTER to confirm the code number Tuning into the locked channels55 En Press 8ENTERPop 56 EnPress H Info or Odisplay ALLControlling iPod Using iPodRemote control operation Controlling iPod in the simple remote Mode58 En Controlling iPod in the menu browse ModeFunction of the play information display 59 En Using Bluetooth componentsPairing by using SET Menu Quick pairing60 En RecordingManual setup Manual Setup Auto setup Auto Setup61 En Signal information Signal Info Using SET Menu62 En 63 En Speaker settings Aspeaker SET64 En Unit Unit 65 EnSpeaker level BSP Level Speaker distance CSP DistanceLow-frequency effect level Elfe Level Audio settings Gaudio SET66 En Center speaker equalizer Dcenter GEQSupport audio S.AUDIO Maximum volume MAX VOLInitial volume INIT.VOL 67 EnFor Optical Input jacks 2 68 EnInput assignment For Coaxial Input jack69 En Multi channel input setupDTS decoder prioritize setting Decoder select mode70 En Display settings Adisplay SET71 En Bluetooth setting Ebluetooth SETPress 8ENTER to start pairing Press 9RETURN to exit from Start PairingXM Radio antenna XM Antenna XM Radio setting FXM Radio SET A. and Canada models onlySirius Satellite Radio setting 72 EnControlling this unit Remote control featuresControlling this unit, a TV, or other components 73 EnControlling other components 74 En75 En Setting remote control codesRemote control code default settings Input Component Manufacturer DefaultOnly a STANDBY/ON, L Program l/ h, Advanced setup76 En Speaker impedance SP IMP A. and Canada models onlyTuner frequency step TU Asia and General models only 77 EnInitializing Init General TroubleshootingProblem Cause Remedy See 78 En79 En Problem Cause Remedy80 En Tuner 81 EnXM Satellite Radio 82 EnSirius Satellite Radio 83 EnDuring Auto Setup Before Auto Setup84 En 85 En After Auto Setup1OUT of Phase 3LEVEL Error86 En Bluetooth87 En Remote controlResetting the system Advanced setup menu appears in the front panel display88 En GlossaryPCM Linear PCM 89 EnLFE 0.1 channel Neural Surround90 En SpecificationsNumerics SymbolsIndex 91 EnFdynamic Range 92 En93 En Selection, Preset stationFront panel Power Sirius Mute MD/CD-R Tuner DVD DTV/CBL DVR Iii List of remote control codesCCE NEI TV/DVD STS Front panel/Face avant RX-V463Remote control/Boîtier de télécommande

RX-V463 specifications

The Yamaha RX-V463 is an impressive AV receiver that caters to both home theater enthusiasts and casual listeners. Offering a remarkable blend of advanced technologies and robust features, it is designed to deliver an immersive audio-visual experience.

One of the standout features of the RX-V463 is its ability to support high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. This capability ensures that users can enjoy their favorite movies and music with incredible clarity and precision. The receiver is equipped with a powerful 7.1 channel amplification system, delivering a total output power of 110 watts per channel. This power ensures that users can experience rich, dynamic sound with plenty of headroom for home theater applications.

The RX-V463 is also designed with HDMI connectivity in mind. It boasts multiple HDMI inputs, allowing users to connect various high-definition sources like Blu-ray players, gaming consoles, and streaming devices with ease. The receiver supports 1080p video pass-through, ensuring high-quality video output to compatible displays. Moreover, the inclusion of HDMI CEC functionality simplifies control of connected devices, allowing users to operate multiple systems with a single remote.

One of the notable technologies incorporated into the RX-V463 is YPAO (Yamaha Parametric Room Acoustic Optimizer). This innovative feature automatically analyzes a room's acoustics and optimizes the speaker settings accordingly. This means users can enjoy a balanced sound tailored to the specific characteristics of their listening environment, enhancing overall audio performance.

For those who love music beyond movies, the RX-V463 offers compatibility with a range of audio formats, including MP3, WMA, and AAC. Its built-in FM tuner enables easy access to radio stations, while the option to connect external devices through the front-panel USB port makes listening to digital music files a breeze.

In addition to impressive audio and video performance, the Yamaha RX-V463 is designed with user-friendliness in mind. Its intuitive on-screen menu system allows for easy navigation and configuration, while the remote control further enhances convenience. With a compact design, the receiver easily integrates into most entertainment setups without taking up unnecessary space.

In summary, the Yamaha RX-V463 stands out as a capable and versatile AV receiver. With its support for advanced audio formats, robust amplification, user-friendly features, and room calibration technology, it provides an outstanding experience for anyone looking to elevate their home entertainment system. Whether enjoying a blockbuster movie or streaming favorite tunes, the RX-V463 delivers performance and enjoyment in one neat package.
Top Page Image Contents