Yamaha RX-V463 owner manual Specifications, 90 En

Page 94

Specifications

AUDIO SECTION

•Minimum RMS Output Power for Front, Center, Surround [U.S.A. and Canada models]

1 kHz, 0.9% THD, 8 Ω

105 W

[Other models]

 

1 kHz, 0.9% THD, 6 Ω

105 W

• Maximum Power for Front, Center, Surround (JEITA)

1 kHz, 10% THD, 6 Ω

130 W

• Dynamic Power

 

[U.S.A. and Canada models]

 

(IHF, 8/6/4/2 Ω)

90/110/130/150 W

[Other models]

 

(IHF, 6/4/2 Ω)

100/110/125 W

• Dynamic Headroom [U.S.A. and Canada models]

8 Ω

0.27 dB

• Maximum Input Signal

 

CD, etc. Effect On, 1 kHz, 0.5% THD

2.0 V or more

• Frequency Response

 

CD, etc. to Front L/R

10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

 

[U.S.A. and Canada models]

 

(1 kHz, 45 W, Front L/R, 8 Ω )

0.06% or less

[Other models]

 

(1 kHz, 50 W, Front L/R, 6 Ω )

0.06% or less

• Signal to Noise Ratio (IHF-A Network)

 

CD (200 mV) to Front L/R, Effect Off

98 dB or more

CD (250 mV) to Front L/R, Effect Off

100 dB or more

• Residual Noise (IHF-A Network)

 

Front L/R

150 µV or less

• Channel Separation (1 kHz/10 kHz)

 

CD, etc. (5.1 kΩ shorted) to Front L/R

 

...................................................................

60 dB/45 dB or more

• Tone Control (Front L/R)

 

BASS Boost/Cut

±10 dB/100 Hz

TREBLE Boost/Cut

±10 dB/20 kHz

• Headphone Jack Rated Output/Impedance

.............. 400 mV/470 Ω

• Input Sensitivity/Input.................................................................Impedance

200 mV/47 kΩ

CD, etc.

MULTI CH INPUT

200 mV/47 kΩ

• Output Level/Output Impedance

200 mV/1.2 kΩ

AUDIO OUT (REC)

SUBWOOFER OUTPUT

4 V/1.2 kΩ

•Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) H.P.F.

(FRONT SP, CENTER SP, SUR. L/R SP:

SMALL/SML)

12 dB/oct.

L.P.F. (Subwoofer)

24 dB/oct.

VIDEO SECTION

• Video Signal Type (Gray back)

 

[U.S.A., Canada, Korea and General models]

NTSC

[Other models]

PAL

• Signal Level

1 Vp-p/75 Ω

Composite

Component

1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)

• Signal to Noise Ratio

50 dB or more

• Maximum Input Level

1.5 Vp-p or more

• Frequency Response (MONITOR OUT)

Component Signal

5 Hz to 60 MHz, –3 dB

FM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

.......................... 87.5 to 107.9 MHz

[Asia and General models]

87.5/87.50 to 108.0/108.00 MHz

[Other models]

87.50 to 108.00 MHz

• 50 dB Quieting Sensitivity (IHF, 100% mod.)

Mono

2.8 µV (20.2 dBf)

• Signal to Noise Ratio (IHF)

 

Mono/Stereo

73 dB/70 dB

• Harmonic Distortion (1 kHz)

 

Mono/Stereo

0.5%/0.5%

• Antenna Input (unbalanced)

75 Ω

AM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

.............................. 530 to 1710 kHz

[Asia and General models]

530/531 to 1710/1611 kHz

[Other models]

531 to 1611 kHz

GENERAL

• Power Supply

 

[Europe and Russia models]

.............................. 230 V AC, 50 Hz

[U.S.A. and Canada models]

............................. 120 V AC, 60 Hz

[Australia model]

240 V AC, 50 Hz

[Korea model]

220 V AC, 60 Hz

[China model]

220 V AC, 50 Hz

[Asia model]

220-240 V AC, 50/60 Hz

[General model]

110-120/220-240 V AC, 50/60 Hz

• Power Consumption

 

[U.S.A. and Canada models]

................................. 240 W/320 VA

[General model]

260 W

[Other models]

240 W

• Standby Power Consumption

0.8 W

• Maximum Power Consumption [Asia and General models only]

5ch, 10% THD

440 W

• AC Outlets

 

[Australia model]

1 (100 W maximum)

[U.S.A., Canada and China models]... 2 (Total 100 W maximum)

[Other models]

2 (Total 50 W maximum)

• Dimensions (W x H x D)

435 x 151 x 352 mm

 

(17-1/8” x 5-15/16” x 13-7/8”)

• Weight

8.5 kg (18 lbs 12 oz)

* Specifications are subject to change without notice.

90 En

Page 93 Page 95
Image 94
Page 93 Page 95
Contents RX-V463 Important Safety Instructions FCC Information for US customers Example of Antenna GroundingFor Canadian Customers Serial NoContents Features Getting started Supplied accessoriesInstalling batteries in the remote control We Want You Listening For a LifetimePreparation Check the items Set up your speakersQuick start guide Press Scene 1 button Enjoy DVD playbackFront and center speakers Surround speakersFor further connections About Scene function Default assigned Scene templatesPress Scene 1 button Check the type of the connected speakersWhat do you want to do with this unit? Name ConnectionsRear panel A. modelPlacing speakers 10 EnFront B terminals Connecting speakers11 En Surround speakers Right LeftConnecting to the Speaker terminals Before connecting to the Speakers Terminal12 En Audio jacks Information on jacks and cable plugs13 En Video jacksInformation on Hdmi Audio and video signal flow14 En Connecting video components 15 En16 En Connecting other componentsConnecting a DVD player DVD player17 En Connecting a DVD recorder, PVR or VCRConnecting a set-top box PVR or VCRConnecting a multi-format player or an external decoder Connecting audio componentsConnecting a CD player and a CD recorder/MD recorder 18 En19 En Using the Video AUX jacks on the front panelPlayer Connecting the wire of the AM loop antenna Connecting the FM and AM antennasConnecting the power cable 20 EnSet this unit to the standby mode Setting the speaker impedanceTurning on and off the power 21 EnFront panel display 22 EnUsing the remote control 23 EnUsing Auto Setup Optimizing the speaker setting for your listening room24 En 25 En Speaker distance Dist 26 EnNumber of speakers SP Speaker level LVL27 En If an error screen appearsPress 8n and then press 8l / h to select SET or Cancel If Warning appears28 En Selecting the Scene templatesSelecting the desired Scene template Selected Scene template is assigned to the buttonWhich Scene template would you like to select? 29 EnVideo games AUX Game Playing Preset Scene templates descriptions 30 En31 En Customizing the preset Scene TemplatesCreating your original Scene templates Renaming the Scene templatesControlling the input source Components in the Scene mode Using remote control on the Scene feature32 En Basic operations Quick guide to contentsPlayback 33 EnSelecting the Multi CH Input component Selecting audio input jacks34 En 35 En Using your headphonesMuting the audio output Current status screen appears in the OSDAudio information Displaying the input source information36 En Video informationUsing the sleep timer 37 EnSound field program descriptions Sound field programs38 En Enjoying unprocessed input sources Straight decoding mode Enjoying 2-channel sources using Standard decoders39 En 40 En Editing sound fields parametersAdjusting the speaker level Using audio featuresAdjusting the tonal quality Enjoying high quality soundSelecting the night listening mode 42 En43 En FM/AM tuningAutomatic tuning Manual tuning Lights upManual preset tuning Automatic preset tuning44 En See Selecting preset stations on this Selecting preset stationsExchanging preset station Press and hold BPRESET/TUNING for more than 3 secondsXM Satellite Radio online information XM Satellite Radio tuning46 En XM Ready legal disclaimerBasic XM Satellite Radio operations Activating XM Satellite Radio47 En Preset Search mode All Channel Search modeCategory Search mode Direct Number Access modePreset channel number appears in the front panel display Setting XM Satellite Radio preset channels49 En 50 En Displaying the XM Satellite Radio informationDisplaying the XM Satellite Radio information in the OSD 51 En Sirius Satellite Radio tuningConnecting the SiriusConnect tuner Sirius Satellite Radio legal disclaimer52 En Activating Sirius Satellite Radio subscriptionBasic Sirius Satellite Radio operations Displaying the Sirius ID of your SiriusConnect tunerPRESET/TUNING/CH l/ hor 8PRESET/CH k/ n PRESET/TUNING/CH l/ h or 8PRESET/CH k/ n53 En PRESET/TUNING/CH l/ h or 8PRESET/CH k/ n Setting the Parental LockSetting the code number and the locked Channels 54 EnPress 8ENTER Tuning into the locked channels55 En Press 8ENTER to confirm the code numberALL 56 EnPress H Info or Odisplay PopControlling iPod in the simple remote Mode Using iPodRemote control operation Controlling iPod58 En Controlling iPod in the menu browse ModeFunction of the play information display Quick pairing Using Bluetooth componentsPairing by using SET Menu 59 EnRecording 60 EnManual setup Manual Setup Auto setup Auto Setup61 En Signal information Signal Info Using SET Menu62 En Speaker settings Aspeaker SET 63 En64 En Speaker distance CSP Distance 65 EnSpeaker level BSP Level Unit UnitCenter speaker equalizer Dcenter GEQ Audio settings Gaudio SET66 En Low-frequency effect level Elfe Level67 En Maximum volume MAX VOLInitial volume INIT.VOL Support audio S.AUDIOFor Coaxial Input jack 68 EnInput assignment For Optical Input jacks 2Decoder select mode Multi channel input setupDTS decoder prioritize setting 69 EnDisplay settings Adisplay SET 70 EnPress 9RETURN to exit from Start Pairing Bluetooth setting Ebluetooth SETPress 8ENTER to start pairing 71 En72 En XM Radio setting FXM Radio SET A. and Canada models onlySirius Satellite Radio setting XM Radio antenna XM Antenna73 En Remote control featuresControlling this unit, a TV, or other components Controlling this unit74 En Controlling other componentsInput Component Manufacturer Default Setting remote control codesRemote control code default settings 75 EnSpeaker impedance SP IMP A. and Canada models only Advanced setup76 En Only a STANDBY/ON, L Program l/ h,Tuner frequency step TU Asia and General models only 77 EnInitializing Init 78 En TroubleshootingProblem Cause Remedy See GeneralProblem Cause Remedy 79 En80 En 81 En Tuner82 En XM Satellite Radio83 En Sirius Satellite RadioDuring Auto Setup Before Auto Setup84 En 3LEVEL Error After Auto Setup1OUT of Phase 85 EnBluetooth 86 EnAdvanced setup menu appears in the front panel display Remote controlResetting the system 87 EnGlossary 88 EnNeural Surround 89 EnLFE 0.1 channel PCM Linear PCMSpecifications 90 En91 En SymbolsIndex Numerics92 En Fdynamic RangeSelection, Preset station 93 EnFront panel Power Sirius Mute MD/CD-R Tuner DVD DTV/CBL DVR List of remote control codes IiiCCE NEI TV/DVD STS RX-V463 Front panel/Face avantRemote control/Boîtier de télécommande

RX-V463 specifications

The Yamaha RX-V463 is an impressive AV receiver that caters to both home theater enthusiasts and casual listeners. Offering a remarkable blend of advanced technologies and robust features, it is designed to deliver an immersive audio-visual experience.

One of the standout features of the RX-V463 is its ability to support high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. This capability ensures that users can enjoy their favorite movies and music with incredible clarity and precision. The receiver is equipped with a powerful 7.1 channel amplification system, delivering a total output power of 110 watts per channel. This power ensures that users can experience rich, dynamic sound with plenty of headroom for home theater applications.

The RX-V463 is also designed with HDMI connectivity in mind. It boasts multiple HDMI inputs, allowing users to connect various high-definition sources like Blu-ray players, gaming consoles, and streaming devices with ease. The receiver supports 1080p video pass-through, ensuring high-quality video output to compatible displays. Moreover, the inclusion of HDMI CEC functionality simplifies control of connected devices, allowing users to operate multiple systems with a single remote.

One of the notable technologies incorporated into the RX-V463 is YPAO (Yamaha Parametric Room Acoustic Optimizer). This innovative feature automatically analyzes a room's acoustics and optimizes the speaker settings accordingly. This means users can enjoy a balanced sound tailored to the specific characteristics of their listening environment, enhancing overall audio performance.

For those who love music beyond movies, the RX-V463 offers compatibility with a range of audio formats, including MP3, WMA, and AAC. Its built-in FM tuner enables easy access to radio stations, while the option to connect external devices through the front-panel USB port makes listening to digital music files a breeze.

In addition to impressive audio and video performance, the Yamaha RX-V463 is designed with user-friendliness in mind. Its intuitive on-screen menu system allows for easy navigation and configuration, while the remote control further enhances convenience. With a compact design, the receiver easily integrates into most entertainment setups without taking up unnecessary space.

In summary, the Yamaha RX-V463 stands out as a capable and versatile AV receiver. With its support for advanced audio formats, robust amplification, user-friendly features, and room calibration technology, it provides an outstanding experience for anyone looking to elevate their home entertainment system. Whether enjoying a blockbuster movie or streaming favorite tunes, the RX-V463 delivers performance and enjoyment in one neat package.
Top Page Image Contents