Yamaha RX-V450 Connections, Cable indications, Video jacks, Analog jacks, Digital jacks

Page 16

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the mains power until all connections between components are complete.

■Cable indications

For analog signals

 

left analog cables

L

right analog cables

R

Dust protection cap

Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical jack, be sure to put the cap back in place. This cap protects the jack from dust.

■Video jacks

This unit has two types of video jacks. Connection depends on the availability of input jacks on your monitor.

COMPONENT VIDEO

For digital signals

 

optical cables

O

coaxial cables

C

VIDEO

VIDEO jack

PR PB Y

For video signals

 

video cables

V

■Analog jacks

You can input analog signals from audio components by connecting audio pin cable to the analog jacks on this unit. Connect red plugs to the right jacks and white plugs to the left jacks.

■Digital jacks

This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack. All digital input jacks are compatible with 96-kHz sampling digital signals.

Note

This unit handles digital and analog signals independently. Thus audio signals input to the analog jacks are only output to the analog OUT (REC) jacks.

For conventional composite video signals.

COMPONENT VIDEO jacks

For component signals, separated into luminance (Y) and color difference (PB, PR) to provide the best quality in picture reproduction.

Signal flow inside this unit

 

Input

Output

(MONITOR OUT)

COMPONENT

VIDEO

VIDEO

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents RX-V450 For U.K. customers Special Instructions for U.K. ModelContents Features Built-in 6-channel power amplifierSound field features Other featuresSupplied accessories Installing batteries in the remote controlGetting Started Please check that you received all of the following partsControls and Functions Front panelEurope models only Remote control Using the remote control Handling the remote controlRDS tuning buttons FREQ/RDSFront panel display Input channel indicators/speaker indicators RDS indicators Europe models onlyAC Outlets Rear panelVoltage Selector Speaker Setup Speaker placementSpeaker connections Banana plug connections10 mm Red positive + Black negativeFront terminals Center terminalsSurround terminals SUB Woofer jackConnections Cable indicationsVideo jacks Analog jacksConnecting video components Connections for DVD playbackDVD player Video MonitorConnecting to the Multi CH Input jacks Connections for other video components Video AUX jacks on the front panelConnecting audio components Connections for audio componentsCD player MD recorder orConnecting the antennas Connecting the AM loop antennaFrequency Step switch Asia and General models only 75-ohm/300-ohm antenna adapter U.K. model onlyConnecting the AC power cord Memory back-upImpedance Selector switch Impedance Selector switchTurn on the video monitor connected to this unit Turning on the powerFront panel Basic Setup Using the Basic Setup menuPress d to display SET/CANCEL Press j To select the desired settingPress j / i to select the number of speakers you connected 2spkTo balance the speaker levels Perform the following steps after seePress SET Menu to exit after balancing the speakers Memory back-upAdjust the volume to the desired output level PlaybackBasic operations Select the input sourceTo listen with headphones Silent Cinema To adjust the toneYou can adjust the tonal quality Your front left and right Select a sound field program if desiredSelecting sound field programs Selecting Multi CH InputPlaying video sources Background Front panel operationRemote control operation Enjoying multi-channel softwareAuto Auto Decoders select with jPress q/DTS on the remote control to select the decoder Enjoying 2-channel softwareListening to high fidelity stereo sound Direct Stereo This adjusts the level of compressionNight listening modes Listening to unprocessed input signals Selecting input modesDownmixing to 2 channels Virtual Cinema DSPInformation about the input signal Displaying information about the inputSource Press u / d to display the followingAutomatic and manual tuning TuningAutomatic tuning Manual tuning Presetting stationsAutomatically presetting FM stations Manually presetting stations Automatic preset tuning optionsSelecting preset stations Preset numberShows the displayed station has been stored as C3 Repeat steps 1 to 5 to store other stationsSee Selecting preset stations Press and hold PRESET/TUNING Edit for more than 3 secondsReceiving RDS stations Changing the RDS mode To cancel this function Press PTY Seek Mode to set this unit in the PTY Seek modePress PTY Seek Mode twice PTY Seek functionEON function Front panel Remote control Special considerations when recording DTS softwareRecording Sound Field Program Descriptions For movie/video sourcesDTS 96/24 DTS ES Mtrx6.1DTS ES Disc6.1 PRO LogicFor music sources Using the sleep timer Canceling the sleep timerSetting the sleep timer Sleep indicatorUsing the test tone SET Menu Sound MenuInput Menu Option MenuUsing SET Menu Subwoofer phase Swfr Phase Center speaker CenterFront speakers Front Surround left/right speakers Surr LRSpeaker level BSP Level Speaker distance CSP DistanceCenter graphic equalizer Dcenter GEQ Low-frequency effect level Elfe LevelInput/output assignment AI/O Assign Speaker B set SP B Parameter initialization CPARAM. INIDimmer Dimmer Remote Control Features Control areaControlling this unit Controlling other componentsSetting manufacturer codes Input area Category Manufacturer Code LibraryControlling other components VCREditing Sound Field Parameters What is a sound fieldElements of a sound field Resetting parameters to the factory presets To reset a certain parameterTo reset all parameters Use PARAM. INI seeSound Field Parameter Descriptions Delay DelayFor 6ch Stereo From front left and right speakers, initial setting is For PRO Logic IIx Music and PRO Logic II MusicCT Width Center width For DTS Neo6 Music Image Center imageTroubleshooting GeneralSound suddenly Goes offOnly the speaker on One side can beOr DTS indicator Volume levelDolby Digital or DTS Sources cannot beRemote control TunerResetting the Factory Presets Be sure this unit is in standby modePress Straight to select the desired setting Hold down Straight on the front panel and press STANDBY/ONGlossary Audio formatsSound field programs Audio informationLFE 0.1 channel PCM Linear PCMComponent video signal Video signal informationComposite video signal Specifications MD Recorder CD playerVCR CD RecorderWD06120

RX-V450 specifications

The Yamaha RX-V450 is a versatile and reliable AV receiver that has gained recognition for its performance and feature set. As part of Yamaha's RX series, this model is designed to deliver a comprehensive home theater experience, making it a popular choice for audiophiles and casual users alike.

One of the standout features of the RX-V450 is its powerful amplification. With a robust power output of 100 watts per channel across five channels, it can easily drive most home theater speakers, filling rooms with immersive sound. The receiver supports a wide range of audio formats, including Dolby Digital, DTS, and Pro Logic II, ensuring that users can enjoy high-quality audio from various sources.

In terms of connectivity, the RX-V450 is well-equipped. It provides multiple HDMI inputs, allowing for easy integration of modern devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver also offers component video, composite video, and S-video inputs, making it compatible with older equipment. Furthermore, the inclusion of digital and analog audio inputs provides flexibility for connecting various media sources.

One of the technological advancements found in the Yamaha RX-V450 is its inclusion of Cinema DSP, which allows users to enjoy a more realistic soundstage while watching movies or playing games. This technology simulates the acoustics of different environments, enhancing the audio experience by providing ambient sound that feels natural and enveloping.

In addition to its audio capabilities, the RX-V450 features an intuitive on-screen display that simplifies setup and operation. Users can easily navigate through various settings and preferences, making adjustments to audio levels, speaker configurations, and audio modes straightforward.

The RX-V450 also includes a built-in AM/FM tuner and offers preset memory for storing favorite radio stations. This adds to its versatility, allowing users to enjoy music and talk radio without needing external components.

Overall, the Yamaha RX-V450 combines power, quality, and convenience in one package. Its robust amplification, diverse connectivity options, and advanced audio technologies make it a solid choice for anyone looking to enhance their home entertainment experience. Whether watching movies, listening to music, or gaming, the RX-V450 is designed to deliver exceptional audio performance that meets the demands of modern media consumption.
Top Page Image Contents