Yamaha RX-V450 owner manual Specifications

Page 71

SPECIFICATIONS

AUDIO SECTION

•Minimum RMS Output Power for Front, Center, Surround, Surround back

20 Hz to 20 kHz, 0.06% THD, 8 Ω

85 W

• Maximum Power (EIAJ)

 

 

[China, Korea and General models]

 

 

1 kHz, 10% THD, 8 Ω

125 W

• Dynamic Power (IHF)

 

 

8/6/4/2 Ω

115/150/185/230 W

• DIN Standard Output Power [U.K. Europe and Asia models]

1 kHz, 0.7% THD, 4 Ω

130 W

• IEC Output Power [U.K. Europe and Asia models]

 

1 kHz, 0.06% THD, 8 Ω

95 W

• Damping Factor (IHF)

 

 

20 Hz to 20 kHz, 8 Ω

100 or more

• Frequency Response

 

 

CD terminal to Front L/R

10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

 

 

CD, etc. to Front L/R (20 Hz to 20 kHz, 40 W, 8 Ω)

.......... 0.06%

• Signal to Noise Ratio (IHF-A Network)

 

 

CD (250 mV) to Front L/R, Effect Off

100 dB

• Residual Noise (IHF-A Network)

 

 

Front L/R

150 µV or less

• Channel Separation (1 kHz/10 kHz)

 

 

CD (5.1 kΩ terminated) to Front L/R

60 dB/45 dB

• Tone Control (Front L/R)

 

 

BASS Boost/Cut

±10 dB/60 Hz

TREBLE Boost/Cut

±10 dB/20 kHz

• Phones Output

150 mV/100 Ω

• Input Sensitivity/Input..................................................................Impedance

200 mV/47 kΩ

CD, etc.

MULTI CH INPUT

200 mV/47 kΩ

• Output Level/Output.............................................................Impedance

200 mV/1.2 kΩ

REC OUT

SUB WOOFER

4 V/1.2 kΩ

VIDEO SECTION

• Video Signal Type

PAL/NTSC

• Signal to Noise Ratio

50 dB

• Frequency Response (MONITOR OUT)

 

Composite

5 Hz to 10 MHz, –3 dB

Component

5 Hz to 60 MHz, –3 dB

FM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

............................87.5 to 107.9 MHz

[Asia and General model]

87.5/87.50 to 108.0/108.00 MHz

[Other models]

87.50 to 108.00 MHz

• Usable Sensitivity (IHF)

1.0 µV (11.2 dBf)

• Signal to Noise Ratio (IHF)

 

Mono/Stereo

76 dB/70 dB

• Harmonic Distortion (1 kHz)

 

Mono/Stereo

0.2%/0.3%

• Stereo Separation (1 kHz)

42 dB

• Frequency Response

20 Hz to 15 kHz, +0.5, –2 dB

AM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

............................... 530 to 1710 kHz

[Asia and General models]

530/531 to 1710/1611 kHz

[Other models]

531 to 1611 kHz

• Usable Sensitivity

300 µV/m

GENERAL

• Power Supply

 

 

[U.S.A. and Canada models]

...............................AC 120 V, 60 Hz

[Australia model]

AC 240 V, 50 Hz

[China model]

AC 220 V, 50 Hz

[Korea model]

AC 220 V, 60 Hz

[U.K. and Europe models]

AC 230 V, 50 Hz

[General model]

AC 110/120/220/230-240 V, 50/60 Hz

[Asia model]

AC 220/230-240 V, 50/60 Hz

• Power Consumption

 

 

[U.S.A. and Canada models]

.................................. 350 W/440 VA

[Other models]

360 W

• Standby Power Consumption

..................................................

0.1 W

• AC Outlets

 

 

[U.K. and Australia models]

1 (Total 100 W maximum)

[Asia and General models]

2 (Total 50 W maximum)

[Other models]

2 (Total 100 W maximum)

• Dimension (W x H x D)

435 x 161 x 416 mm

• Weight

11 kg

 

INFORMATION

ADDITIONAL

 

 

 

 

 

 

 

English

 

 

 

 

69

Page 70 Page 72
Image 71
Page 70 Page 72
Contents RX-V450 Special Instructions for U.K. Model For U.K. customersContents Other features FeaturesBuilt-in 6-channel power amplifier Sound field featuresPlease check that you received all of the following parts Supplied accessoriesInstalling batteries in the remote control Getting StartedFront panel Controls and FunctionsEurope models only Remote control FREQ/RDS Using the remote controlHandling the remote control RDS tuning buttonsFront panel display RDS indicators Europe models only Input channel indicators/speaker indicatorsVoltage Selector Rear panelAC Outlets Speaker placement Speaker SetupRed positive + Black negative Speaker connectionsBanana plug connections 10 mmSUB Woofer jack Front terminalsCenter terminals Surround terminalsAnalog jacks ConnectionsCable indications Video jacksVideo Monitor Connecting video componentsConnections for DVD playback DVD playerConnecting to the Multi CH Input jacks Video AUX jacks on the front panel Connections for other video componentsMD recorder or Connecting audio componentsConnections for audio components CD player75-ohm/300-ohm antenna adapter U.K. model only Connecting the antennasConnecting the AM loop antenna Frequency Step switch Asia and General models onlyMemory back-up Connecting the AC power cordImpedance Selector switch Impedance Selector switchFront panel Turning on the powerTurn on the video monitor connected to this unit Using the Basic Setup menu Basic Setup2spk Press d to display SET/CANCELPress j To select the desired setting Press j / i to select the number of speakers you connectedMemory back-up To balance the speaker levelsPerform the following steps after see Press SET Menu to exit after balancing the speakersSelect the input source Adjust the volume to the desired output levelPlayback Basic operationsSelect a sound field program if desired To listen with headphones Silent CinemaTo adjust the tone You can adjust the tonal quality Your front left and rightFront panel operation Selecting sound field programsSelecting Multi CH Input Playing video sources BackgroundDecoders select with j Remote control operationEnjoying multi-channel software Auto AutoEnjoying 2-channel software Press q/DTS on the remote control to select the decoderNight listening modes This adjusts the level of compressionListening to high fidelity stereo sound Direct Stereo Virtual Cinema DSP Listening to unprocessed input signalsSelecting input modes Downmixing to 2 channelsPress u / d to display the following Information about the input signalDisplaying information about the input SourceAutomatic tuning TuningAutomatic and manual tuning Automatically presetting FM stations Presetting stationsManual tuning Automatic preset tuning options Manually presetting stationsRepeat steps 1 to 5 to store other stations Selecting preset stationsPreset number Shows the displayed station has been stored as C3Press and hold PRESET/TUNING Edit for more than 3 seconds See Selecting preset stationsReceiving RDS stations Changing the RDS mode PTY Seek function To cancel this functionPress PTY Seek Mode to set this unit in the PTY Seek mode Press PTY Seek Mode twiceEON function Recording Special considerations when recording DTS softwareFront panel Remote control For movie/video sources Sound Field Program DescriptionsPRO Logic DTS 96/24DTS ES Mtrx6.1 DTS ES Disc6.1For music sources Sleep indicator Using the sleep timerCanceling the sleep timer Setting the sleep timerUsing the test tone Option Menu SET MenuSound Menu Input MenuUsing SET Menu Surround left/right speakers Surr LR Subwoofer phase Swfr PhaseCenter speaker Center Front speakers FrontLow-frequency effect level Elfe Level Speaker level BSP LevelSpeaker distance CSP Distance Center graphic equalizer Dcenter GEQInput/output assignment AI/O Assign Dimmer Dimmer Parameter initialization CPARAM. INISpeaker B set SP B Controlling other components Remote Control FeaturesControl area Controlling this unitInput area Category Manufacturer Code Library Setting manufacturer codesVCR Controlling other componentsElements of a sound field What is a sound fieldEditing Sound Field Parameters Use PARAM. INI see Resetting parameters to the factory presetsTo reset a certain parameter To reset all parametersFor 6ch Stereo Delay DelaySound Field Parameter Descriptions For DTS Neo6 Music Image Center image From front left and right speakers, initial setting isFor PRO Logic IIx Music and PRO Logic II Music CT Width Center widthGeneral TroubleshootingOne side can be Sound suddenlyGoes off Only the speaker onSources cannot be Or DTS indicatorVolume level Dolby Digital or DTSTuner Remote controlHold down Straight on the front panel and press STANDBY/ON Resetting the Factory PresetsBe sure this unit is in standby mode Press Straight to select the desired settingAudio formats GlossaryPCM Linear PCM Sound field programsAudio information LFE 0.1 channelComposite video signal Video signal informationComponent video signal Specifications CD Recorder MD RecorderCD player VCRWD06120

RX-V450 specifications

The Yamaha RX-V450 is a versatile and reliable AV receiver that has gained recognition for its performance and feature set. As part of Yamaha's RX series, this model is designed to deliver a comprehensive home theater experience, making it a popular choice for audiophiles and casual users alike.

One of the standout features of the RX-V450 is its powerful amplification. With a robust power output of 100 watts per channel across five channels, it can easily drive most home theater speakers, filling rooms with immersive sound. The receiver supports a wide range of audio formats, including Dolby Digital, DTS, and Pro Logic II, ensuring that users can enjoy high-quality audio from various sources.

In terms of connectivity, the RX-V450 is well-equipped. It provides multiple HDMI inputs, allowing for easy integration of modern devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver also offers component video, composite video, and S-video inputs, making it compatible with older equipment. Furthermore, the inclusion of digital and analog audio inputs provides flexibility for connecting various media sources.

One of the technological advancements found in the Yamaha RX-V450 is its inclusion of Cinema DSP, which allows users to enjoy a more realistic soundstage while watching movies or playing games. This technology simulates the acoustics of different environments, enhancing the audio experience by providing ambient sound that feels natural and enveloping.

In addition to its audio capabilities, the RX-V450 features an intuitive on-screen display that simplifies setup and operation. Users can easily navigate through various settings and preferences, making adjustments to audio levels, speaker configurations, and audio modes straightforward.

The RX-V450 also includes a built-in AM/FM tuner and offers preset memory for storing favorite radio stations. This adds to its versatility, allowing users to enjoy music and talk radio without needing external components.

Overall, the Yamaha RX-V450 combines power, quality, and convenience in one package. Its robust amplification, diverse connectivity options, and advanced audio technologies make it a solid choice for anyone looking to enhance their home entertainment experience. Whether watching movies, listening to music, or gaming, the RX-V450 is designed to deliver exceptional audio performance that meets the demands of modern media consumption.
Top Page Image Contents