Clover Electronics RD435 instruction manual Precautions, Features, Installation

Page 2

PRECAUTIONS

To avoid electrical shock, do not open the case of this product.

Operate this product using only the supplied AC Power supply.

Do not overload electrical outlets or extension cords; this can result in fire or electric shock.

Keep this product away from strong magnetic fields.

Do not expose this product in direct sunlight or strong reflected rays.

Refer servicing to qualified personnel only.

Do not change or modify this product, the warranty will be voided.

FEATURES

Weatherproof (IP67)

1/3” Sony Super HAD CCD

420 TV Lines of Resolution

Rugged Steel Construction

Total 8 Super Power Infrared LEDs with a CDS sensor

60’ IR range (depends on scene reflection)

Attached Mounting Base (for ceiling & wall) and 100’ cable

DC12V Power Source

INSTALLATION

1.Attach the mounting bracket (1) to the wall or ceiling, wherever you want to install the camera. Locate a wall stud or ceiling joist and secure the mounting base using the supplied screws (2). Attach the camera to the mounting hole (3).

2.How to set angle of view:

Set the desired angle of camera toward objects by moving the camera right /left and up/down.

3.Connect the one end of 100’ cable (supplied) to the Din jack of 5’ cable attached to the camera. Make sure that two arrows on the top of them should be aimed at each other. Connect the other end (BNC or RCA) of cable to the video devices such as DVR, monitor/TV. Plug the provided AC adapter to the DC jack (red) of the end of 100’ cable.

Image 2
Contents DAY and Night Color Camera Installation PrecautionsFeatures Trouble Shooting HOW to Obtain Factory Service SpecificationsLimited 2 Year Warranty Available Accessories Package IncludesM O M O Copyright 2008 Clover Electronics U.S.A. All Rights Reserved