Clover Electronics RD435 Specifications, Limited 2 Year Warranty, HOW to Obtain Factory Service

Page 4

The image on the screen flickers

Does the camera face to directly to the

 

sunlight or fluorescent light? Change the

 

camera position

Picture rolls and jumps, scrambled

Improper V-hold control. Setting on your

picture

monitor

Picture smaller than screen

House current may be too low

SPECIFICATIONS

Image sensor

1/3” Sony Super HAD CCD, 510H x 582V

Scanning system

525 lines, 2:1 interlace

Horizontal resolution

420 TV lines

Shutter speed

Auto, Manual (1/60 to 1/100,000 sec)

Sync. System

Internal

S/N ratio

more than 46db (AGC off)

Minimum illumination

0.1 Lux with LEDs- Off

Video output

Composite 1.0Vp-p @75 Ω

AGC

Auto

White balance

Auto

Lens

6mm fixed lens

Current consumption

450mA Max

Power supply

DC 15V, 1.5A

Operating temperature

-10°C to 50°C

Dimensions

54 (W) x 58 (H) x 130 (D) mm

Weight

1.8 Lbs

LIMITED 2 YEAR WARRANTY

This warranty gives the original purchaser specific legal rights and you may also have other rights, which vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair free of charges for 2 years on parts and labor from the date of original purchase. This warranty does not cover modification, abuse, incidental or consequential damages unless the state of owner’s residence specially prohibits limitations on incidental or consequential damages.

HOW TO OBTAIN FACTORY SERVICE

1.Original purchaser must fill out a warranty card and mail it to the factory with model number, serial number and the date of purchase.

Image 4
Contents DAY and Night Color Camera Features PrecautionsInstallation Trouble Shooting Limited 2 Year Warranty SpecificationsHOW to Obtain Factory Service Available Accessories Package IncludesM O M O Copyright 2008 Clover Electronics U.S.A. All Rights Reserved