Allied International GX1050C manual Legal notice

Page 3

Legal notice

For customers in the U.S.A. (FCC Compliance Information)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However there is no guarantee that interferences will not occur in a particular installation. Operation of this equipment in a residential environment is likely to cause harmful interference.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a computing device pursuant to Subpart B of Part 15 of FCC Rules.

For customers in Canada

This digital apparatus complies with the Class A limits for radio noise emissions set out in the Radio Interference Regulations.

Pour utilisateurs au Canada

Cet appareil numérique est conforme aux normes classe A pour bruits radioélectriques, spécifiées dans le Règlement sur le brouillage radioélectrique.

Life support applications

These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Allied Vision Technologies customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Allied Vision Technologies for any damages resulting from such improper use or sale.

Trademarks

Unless stated otherwise, all trademarks appearing in this document are the property of Allied Vision Technologies and are fully protected by law.

Warranty

The information provided by Allied Vision Technologies is supplied without any guarantees or warranty whatsoever, be it specific or implicit. Also excluded are all implicit warranties concerning the negotiability, the suitability for specific applications or the non-breaking of laws and patents. Even if we assume that the information supplied to us is accurate, errors and inaccuracy may still occur.

Copyright

All text, pictures and graphics are protected by copyright and other laws protecting intellectual property. It is not permitted to copy or modify them for trade use or transfer, nor may they be used on web sites.

Allied Vision Technologies Canada Inc. 1/2010

All rights reserved.

GX1050 Technical Manual

Page 3

Image 3
Contents 700056A GX1050 / GX1050CTable of Contents Legal notice Contacting Allied Vision Technologies Precautions WarrantyIntroduction GX1050 Technical Manual Specifications Supported Features Mechanical Connections See Addendum for more detail Gigabit Ethernet PortsExternal Power 8mA 500 32mW 14 µs GPO Lens Control Port PIN Function Identifying Debris Cleaning the SensorCleaning with Air Contact CleaningAdjusting the C-mount Loosen Locking RingImage to Infinity Network Card Configuration GX1050 Technical Manual GX1050 Technical Manual GX1050 Technical Manual GigE Viewer application window GigE Sample Viewer and Filter DriverTrouble Shooting Is the camera getting power?Is the camera powered, but not detected in SampleViewer? Ipconfig /all screenshot Saving camera setting file Addendum 3V Logic GX IO SchematicCircuit User Trigger Circuit ExampleLensZoomConnection Iris VideoTrigger Timing Diagram Definitions RulesTriggering during the Idle State Triggering during the Readout State Camera Controls