Yamaha RX-V363 Manual: Troubleshooting and Remote Control Instructions

 Page 63

01EN_RX-V363_U.book Page 59 Friday, December 7, 2007 5:44 PM

Troubleshooting

■Remote control

Problem

Cause

Remedy

See

 

 

page

 

 

 

 

 

 

 

The remote control

Wrong distance or angle.

The remote control functions within a maximum

21

 

 

does not work nor

 

range of 6 m (20 ft) and no more than 30 degrees

 

 

 

function properly.

 

off-axis from the front panel.

 

 

 

 

 

 

 

 

 

 

Direct sunlight or lighting (from an

Reposition this unit.

—

 

 

 

inverter type of fluorescent lamp, etc.) is

 

 

 

 

 

striking the remote control sensor of this

 

 

 

 

 

unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries.

3

 

 

 

 

 

 

 

 

 

 

 

 

The remote control code is not correctly

Set the remote control code correctly using “List of

53

 

 

 

set.

remote control codes” at the end of this manual.

 

 

 

 

 

 

 

 

 

 

 

Try setting another code for the same manufacturer

53

 

 

 

 

using “List of remote control codes” at the end of this

 

 

 

 

 

manual.

 

 

 

 

 

 

 

 

 

Even if the remote control code is correctly set, there are some models that do not respond to the remote control.

■Resetting the system

Use this feature to reset all the parameters of this unit to the initial factory settings.

1Press A STANDBY/ON on the front panel to set this unit to the standby mode.

2Press and hold J TONE CONTROL and then press A STANDBY/ON to turn on this

unit.

The advanced setup menu appears in the front panel display.

3Press K PROGRAM l / h to select “PRESET”.

4Press L STRAIGHT repeatedly to select “RESET”.

Select “CANCEL” to cancel the initialization procedure without making any changes.

5Press A STANDBY/ON to confirm your selection and set this unit to the standby mode.

Notes

•This procedure completely resets all the parameters of this unit including the set menu parameters.

•The initial factory settings are activated next time you turn on this unit.

y

To cancel the initialization procedure at any time without making any changes, press L STRAIGHT repeatedly to select “CANCEL” and then press A STANDBY/ON.

INFORMATION

ADDITIONAL

 

 

English

59 En

Black process 45.0° 240.0 LPI

Page 62 Page 64
Image 63
Page 62 Page 64
Contents
RX-V363 Product and cart combination should be moved Important Safety InstructionsExample of Antenna Grounding FCC Information for US customersFor Canadian Customers Pour LES Consommateurs CanadiensSerial No Contents We Want You Listening For a Lifetime FeaturesAsia and General models only Checking the supplied accessoriesInstalling batteries in the remote control Getting startedEnjoy DVD playback Set up your speakersQuick start guide Preparation Check the itemsFront speakers Center and surround speakersConnect the subwoofer cable to the input For further connections Make sure that this unit and the DVDPlayer are unplugged from the AC wall outlets Check the type of the connected speakers Using the other Scene buttonsRotate H Volume to adjust the volume About Scene functionWhat do you want to do with this unit? Connections Rear panelName See 10 En Placing speakersConnecting speakers Before connecting to the Speakers Terminal11 En Connecting to the Front a terminals Connecting to the Front B, CENTER, and Surround terminals12 En Video jacks Information on jacks and cable plugs13 En Audio jacksHdmi cable plug Information on Hdmi14 En Hdmi jack and cable plugDigital or analog audio input jacks of this unit Connecting video components15 En Audio outHdmi connection Connecting to the Hdmi or Component Video jacksConnecting to the Component Video jacks 16 En17 En Connecting audio componentsConnecting a CD player and a CD recorder/MD recorder Connecting to the Multi CH Input jacks18 En Connecting to the Video AUX jacks on the front panel19 En Connecting the FM and AM antennasConnecting the power cable Turning on and off the power20 En Front panel display30º Using the remote control21 En 1Infrared windowBasic setup SPEAKERS..5spk22 En 23 En Press 7l/ h to select the desired settingPress Hmenu to exit from Basic Setup CHECKTestToneD V i e w i n g Selecting the Scene templatesSelecting the desired Scene template D M o v i e V i e wWhich Scene template would you like to select? 25 En26 En Preset Scene template descriptionsRenaming the Scene templates Customizing the preset Scene TemplatesCreating your original Scene templates 27 EnScene buttons Using remote control on the Scene featureControlling the input source Components in the Scene mode 28 EnV i e D r a m a t i c Guide to contentsPlayback Basic operations30 En Additional operationsSelecting audio input jacks Selecting the night listening modeAdjusting the tonal quality 31 En32 En Adjusting speaker levels during PlaybackDisplaying the signal information Press 4AMP and then press Hmenu on the remote controlAudio sources Using the sleep timer33 En Playing video sources Background34 En Category Program FeaturesSound field programs Sound field program descriptionsEditing sound fields parameters 35 EnEnjoying unprocessed input sources Straight decoding mode 36 EnTo deactivate the Straight mode, press AM 1440 kHz FM/AM tuningAutomatic tuning Manual tuning38 En Automatic preset tuningManual preset tuning C3AM 630 kHzE1FM 87.5 MHz Selecting preset stationsExchanging preset stations Press and hold B PRESET/TUNING for more than 3 secondsUsing iPod 40 EnAUX/DOCK Select V-AUX as the input source Using Bluetooth componentsPairing by using SET Menu Quick pairing42 En RecordingSet menu Basic setup Basic SetupManual setup Manual Setup Parameter Features8RETURN Using set menuSignal information Signal Info 44 En45 En Speaker settings Aspeaker SETSpeaker level BSP Level 46 En47 En 100HzAudio settings Gaudio SET 48 EnInput assignment BGV BGV Multi channel input setupDVD My DVD 49 EnParameter initialization DPARAM. INI Display settings Adisplay SETBluetooth setting Ebluetooth 50 EnControlling this unit Remote control featuresControlling this unit, a TV, or other components 51 EnDigital TV Remote control Player/recor52 En Controlling other components53 En Setting remote control codesResetting all remote control codes Remote control code default settingsSpeaker impedance SP IMP A. and Canada models only Advanced setupInitializing Preset 54 En General Troubleshooting Problem Cause Remedy See 55 En56 En Tuner 57 EnStatus message Cause Remedy See Bluetooth58 En IPod59 En Remote controlResetting the system Advanced setup menu appears in the front panel displayGlossary 60 EnAudio information Cinema DSP 61 EnSound field program information Video information62 En SpecificationsIndex 63 EnNumerics 64 En Page C D E F G H Front panel10 ENT Iii List of remote control codesCCE NEI VCR TV/DVDTV/DVD/VCR TV/VCRWN25860
Related manuals
Manual 77 pages 4.4 Kb
Top Page Image Contents