Yamaha RX-V440RDS owner manual Speaker mode settings, 1A Center center speaker mode, Lrg, Sml, Non

Page 43

6 Press j / i once to enter the setup mode of the selected item.

The last setting you adjusted appears on the front panel display.

Depending on the menu item, press u/d to select a sub item.

–

SELECT

+

 

PRESET/CH

 

–

SELECT

+

 

PRESET/CH

 

SET MENU

SOUND 1 SPEAKER SET

(speaker mode settings)

Use this feature to select suitable output modes for your speaker configuration.

Note

•Some menu item settings have no effect when the unit is reproducing a source with a digital signal sampling frequency greater than 48 kHz.

7 Press j / i repeatedly to change the menu item

– SELECT+

setting.

PRESET/CH

8 Press u / d repeatedly until the menu disappears or just press one of the DSP program group buttons to exit from the set menu.

 

 

 

 

HALL

JAZZ

ROCK

ENTERTAINMENT

 

 

 

 

1

2

3

4

–

SELECT

+

or

MUSIC

TV THTR

MOVIE1

MOVIE2

 

 

 

5

6

7

8

 

 

 

 

/DTS

NIGHT

6.1/5.1

STEREO

 

PRESET/CH

 

 

9

0

+10

ENTER

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If this happens, adjust the items again.

The BASIC and SOUND menus

The “BASIC” menu allows you to easily set the “SOUND 1 SPEAKER SET” and “SOUND 2 SP DISTANCE” parameters. It is not necessary to reset any of the parameters in the “BASIC” menu, but you can access more detailed parameters in the “SOUND” menu if you wish.

Note

•After altering parameters in the “SOUND” menu, if you select “BASIC 1 SETUP” and then select “SET”, the parameters from the “SOUND” menu alter in response to any changes you make in “BASIC 1 SETUP”. Do not enter the “BASIC 1 SETUP” menu unless you wish to change these settings. If you accidentally enter the “BASIC 1 SETUP” menu, select CANCEL to return to the “BASIC” menu. (page 20)

■1A CENTER (center speaker mode)

If you add a center speaker to your speaker configuration, this unit can provide better dialog localization for several listeners and superior synchronization of sound and images.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large center speaker. The unit directs the entire range of the center channel signal to the center speaker.

SML

Select this if you have a small center speaker. The unit directs the low-frequency signals (90 Hz and below) of the center channel to the speakers selected with “1E BASS”.

NON

Select this if you do not have a center speaker. The unit directs all of the center channel signal to the main left and right speakers.

OPERATION

ADVANCED

 

 

English

41

Page 42 Page 44
Image 43
Page 42 Page 44
Contents RX-V440RDS Special Instructions for U.K. Model For U.K. customersContents Sophisticated AM/FM Tuner FeaturesOther features About this manualGetting Started Supplied accessoriesControl Front panel Controls and FunctionsSET Menu -/+ NextRemote control Handling the remote control Using the remote controlFront panel display Connections Connecting to digital jacksConnecting video components TV/digital TV Cable TV DVD playerVideo monitor CD player CD recorder or MD recorder Connecting audio componentsConnecting a CD player Connecting a CD recorder or MD RecorderBecause the inter-station frequency Connecting the antennasConnecting the AM loop antenna Frequency Step switch China and General models onlyDVD/SACD player Connecting an external decoderSpeaker placement Connecting the speakersSpeakers Connections Impedance Selector switchRear Center Speaker terminals Main Speakers terminalsRear Speakers terminals Center Speaker terminalsVoltage Selector Connecting the power supply CordsTurning on the power AC Outlets SwitchedExit Basic System SettingsUsing the basic menu SetupSubwoofer SET/CANCELBasic Sound Input Option RoomSetting speaker output levels Setting the unit to match your Speaker systemTo select the audio source connected to the 6CH Input jacks Front panel Remote controlPlayback To select the main Speakers you want to useTo mute the sound Night listening modeWhen you have finished using this unit BGV background video functionInput modes and indications General AdventureProgram l / h Press q/DTS MatrixSelecting PRO LOGIC, PRO Logic II or Neo6 Playing Dolby Digital EX or DTS ES MaterialPress Stereo again to turn the sound effect back on Virtual Cinema DSPSilent Cinema DSP Normal stereo reproductionRecreating a sound field Digital Sound Field Processing DSPUnderstanding sound fields Hi-Fi DSP programsFor audio-video sources No to CINEMA-DSPSound design of CINEMA-DSP CINEMA-DSP ProgramsStraight Decode For movie programsDolby Pro Logic + DSP sound field effect Sound field effectsDolby Digital/DTS + DSP sound field effect Dolby Digital EX/DTS-ES + DSP sound field effectAM 1530 kHz TuningAutomatic tuning Manual tuningAutomatically presetting stations for FM Stations Presetting stationsA1FM 89.9 MHz Repeat steps 1 to 5 to store other stations Manually presetting stationsC3AM 1440 kHz Tune in to a stationA5FM 90.6 MHz Selecting a preset stationExchanging preset stations E1FM 87.5 MHzReceiving RDS Stations Changing the RDS modeDescription of RDS data EON function To cancel this functionPress PTY Seek Mode to set the unit PTY Seek mode PTY Seek functionSleep 120min L R Sleep TimerSetting the sleep timer Canceling the sleep timerRecording Special considerations when recording DTS materialSET Menu Adjusting the items on the set MenuSet menu list SML Speaker mode settings1A Center center speaker mode LRG1E Bass bass out mode 1B Main main speaker mode1C Rear LR rear speaker mode 1D Rear CT rear center speaker modeDynamic range Setting by metersSetting by feet Speaker distanceSound 5 Center GEQ center Graphic equalizer Initial input modeInput 1 I/O Assign input Output assignment Mute Memory guardDimmer SP B speaker B setControlling other component Remote Control FeaturesControl area Controlling this unitSetting the manufacturer code Tuner CD playerAdjusting the volume during Playback Setting the Speaker LevelsUsing the test tone Sound Field Program Parameter Editing Changing parameter settingsDSP Level DelayDimension Digital sound field parameter descriptionsGeneral TroubleshootingEffect speakers Only the speaker onOne side can be Heard No sound fromNo sound from the rear Volume level cannotOther settings on Unit cannot be changed Unit does not Into standby modeTuner Remote controlCinema DSP GlossarySilent Cinema PCM Linear PCM Component video signalSampling frequency and number Quantized bits Specifications AOC VCRCD Recorder DVD playerMD Recorder CD playerWA88370

RX-V440RDS specifications

The Yamaha RX-V440RDS is a versatile AV receiver that captures the essence of home theater performance with remarkable audio and video quality. Launched in the early 2000s, it has earned praise for its robust features and user-friendly design, making it a popular choice among audiophiles and home theater enthusiasts alike.

At the heart of the RX-V440RDS is a powerful 5-channel amplifier that delivers a substantial output of 80 watts per channel, ensuring that users can enjoy dynamic soundscapes whether watching movies, playing video games, or listening to music. The receiver supports a wide range of surround sound formats, including Dolby Digital, Dolby Pro Logic II, DTS, and enhanced stereo modes, providing an immersive audio experience that draws users deeper into their entertainment.

One of the hallmark features of the RX-V440RDS is its built-in Radio Data System (RDS), which offers enhanced FM radio capabilities. Listeners can enjoy display information that includes station identification and song titles, making tuning into their favorite broadcasts easier and more enjoyable. The receiver also comes with a total of 40 preset FM/AM stations, allowing for quick access to preferred channels.

Connectivity is a key consideration for any AV receiver, and the RX-V440RDS does not disappoint. It is equipped with multiple inputs, including five composite video inputs, four audio inputs, and even a dedicated audio input for connecting a CD player or other sources. This variety allows users to connect multiple devices simultaneously, facilitating seamless switching between different media sources.

The receiver features Yamaha's proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology, which automatically measures the acoustic environment of the room and adjusts the audio settings for optimal sound quality. This smart feature ensures that the system adapts to various room sizes and layouts, delivering a customized listening experience.

Additionally, the Yamaha RX-V440RDS boasts an intuitive on-screen display and a straightforward remote control, making it easy for users to navigate settings and configurations without complicated setups. This user-centric approach extends to its elegant design, which fits seamlessly into any home entertainment setup.

Overall, the Yamaha RX-V440RDS stands out as a reliable AV receiver that continues to be valued for its audio performance and robust feature set. With technologies that prioritize sound quality and ease of use, it is an excellent investment for anyone looking to enhance their home theater experience.
Top Page Image Contents