Pelco C2946M-D manual System Information, Restore Factory Settings

SYSTEM INFORMATION

Select this option to display the camera firmware information.

Restore Factory Settings

Select this option to reset the camera to the factory default settings. This option clears all saved user- definable settings, except the following:

•CAMERA SETUP menu: ADDRESS, COM SPEED

•LINE SYNC menu: V-PHASE ADJ

•PIXEL CORRECTION

RESTORE FACTORY SETTING

ALL SETTING ARE

INITIALIZED

OK CANCEL

To restore the camera to the factory default settings, complete the following steps:

1.Select RESTORE FACTORY SETTINGS on the SYSTEM INFORMATION menu. The RESTORE FACTORY SETTINGS menu appears.

2.Select OK. The camera resets all parameters to the factory default settings (except those listed above), and then the MAIN MENU appears.

24 C2946M-D (6/08)