Pelco C2941M, IP3701H-2X manual Installation, Lens Mounting, Camera Mounting

Page 10

Installation

LENS MOUNTING

The camera can use a fixed iris, manual iris or auto iris lens. The camera is factory set for a CS-mount lens, but is easily adjusted for a C-mount lens.

1.C-mount lens only: Completely rotate the back focus adjustment counterclockwise before installing the C-mount lens (refer to Back Focus Adjustment on page 14).

2.Set the lens mode selector switch on the side of the camera to AIV (auto iris video drive lens) or AID (auto iris DC drive lens). Refer to Switch Settings on page 15. Switch settings are determined by the type of lens used.

3.Screw the lens onto the lens mount. Be careful to prevent dust from entering the space between the lens and the CCD element. If necessary, use clean compressed air to remove any foreign matter.

4.Connect the auto iris lens to the 4-pin connector located on the side of the camera. Pin connections for the iris drive connector are as follows:

3

4

PIN

DC (AID) AUTO IRIS LENS

VIDEO (AIV) AUTO IRIS LENS

1

Control coil negative (-)

Lens positive supply

 

 

 

 

2

Control coil positive (+)

Not used

 

 

3

Drive coil positive (+)

Video drive signal

1

2

4

Drive coil negative (-)

Ground

 

 

 

 

 

CAMERA MOUNTING

Use a standard 1/4-20 screw (provided) with a maximum thread length of 3/8-inch (10 mm) for top or bottom camera mounting.

10

C2941M (8/07)

Page 9 Page 11
Image 10
Page 9 Page 11
Contents IP3701H-2 and IP3701H-2X IP Color Camera Page Contents Important Safety Instructions Regulatory Notices Video Quality CautionDescription ModelsRecording Solution Basic System ConfigurationsPrivate Network Example Mode Function Unit Status Indicator Light Reset ButtonCamera Layout Lens Mounting InstallationCamera Mounting CAT5 Cable Wiring TablesVAC and BNC Connections Optional Wire Gauge Lens Setup and Focus Procedures Back Focus Adjustment Back FocusSwitch Settings Not UsedNot Used Dynamic Range and EDR Troubleshooting Problem Possible Cause Suggested RemedyImage flickering Specifications GeneralEnvironmental C2941M 8/07 Product Warranty and Return Information ISO9001

C2941M, IP3701H-2X specifications

The Pelco IP3701H-2X, C2941M is a high-performance IP security camera that stands out in the field of surveillance technology. This advanced camera is designed to deliver exceptional image quality and reliability, making it an ideal choice for various security applications, from retail environments to critical infrastructure monitoring.

One of the most notable features of the Pelco IP3701H-2X is its high-resolution imaging capability. With a resolution that supports up to 4MP, users can expect sharp, detailed video footage even in challenging lighting conditions. This camera is equipped with a 2X optical zoom, allowing users to capture distant subjects with clarity. The zoom capability also enables operators to focus on specific areas of interest, providing enhanced situational awareness.

The camera supports advanced digital technologies, including Wide Dynamic Range (WDR), which is critical for environments with varying light conditions. WDR ensures that both bright and dark areas within the same scene are visible, making it ideal for locations where sunlight can create significant contrast, such as entryways and parking lots.

The Pelco IP3701H-2X also integrates smart analytics features that enhance security operations. Functions like motion detection and advanced video analytics help reduce false alarms and improve response times. These smart features allow security personnel to be alerted to significant events in real time, ensuring prompt intervention when necessary.

Moreover, this IP camera is equipped with H.265 video compression technology, which optimizes bandwidth usage while maintaining high video quality. This is particularly valuable for organizations looking to maximize storage capabilities and reduce network strain without compromising video integrity.

The Pelco IP3701H-2X is designed for durability and reliability. With an IP66 rating, it is resistant to dust and water, making it suitable for both indoor and outdoor applications. The camera's sturdy construction ensures it can withstand a range of environmental conditions, allowing for versatile deployment options.

In summary, the Pelco IP3701H-2X, C2941M is a feature-rich IP security camera that combines high-resolution imaging, advanced analytics, and robust construction. Its exceptional performance makes it a valuable asset for any security system, ensuring that users can monitor and protect their assets effectively.
Top Page Image Contents