Pelco C1937M-C (4/03), CC3701H-2X manual Models, Description

Page 3

REGULATORY NOTICES

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

DESCRIPTION

The CC3701H-2 and CC3701H-2X are high resolution, color video cameras with a 1/3-inch CCD imager. The cameras feature an extended dynamic range (EDR) mode, a direct drive/auto iris lens connector, ad- justable back focus, backlight compensation, automatic gain control, and an adjustable C/CS lens mount.

Models

CC3701H-2 High resolution, 480 TV lines, SuperHAD™ CCD, minimum illumination of 0.4 lux at f1.2 and 30 IRE, NTSC format

CC3701H-2X High resolution, 470 TV lines, SuperHAD™ CCD, minimum illumination of 0.4 lux at f1.2 and 30 IRE, PAL

Pelco Manual C1937M-C (4/03)

[ 3 ]

Image 3 Contents
Installation/Operation Important Safeguards and Warnings Description ModelsPIN InstallationCamera Layout Lens MountingCamera Mounting Power and Video ConnectionsWire Gauge Back Focus Adjustment Lens Setup and Focus ProceduresSwitch Settings Pelco Manual C1937M-C 4/03 Camera Synchronization AC Operation only Dynamic Range and the EDR Extended Dynamic Range FeatureSpecifications Warranty Warranty and Return Information