1.0 GENERAL
1.1 IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1.Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes.
2.Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclosure, it is designed for Indoor use only and it must not be installed where exposed to rain and moisture.
3.Only use replacement parts recommended by Pelco.
4.After replacement/repair of this unit’s electrical components, conduct a resis- tance measurement between line and exposed parts to verify the exposed parts have not been connected to line circuitry.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
CAUTION: |
RISK OF |
ELECTRIC SHOCK. |
DO NOT OPEN. |
CAUTION: |
TO REDUCE THE RISK OF ELECTRICAL SHOCK, |
DO NOT REMOVE COVER. NO USER- |
SERVICEABLE PARTS INSIDE. REFER SERVICING |
TO QUALIFIED SERVICE PERSONNEL. |
Please thoroughly familiarize yourself with the information
in this manual prior to installation and operation.
Pelco Manual | 5 |