ì
îEthernet Activity LED: Flashes green to indicate that data is being transmitted/received by the camera.
ïEthernet Link LED: Glows solid amber to indicate that a live connection is established.
ñAccessory Port: For use with compatible Pelco accessories.
ó24 VAC Power, Relay, and Alarm Connections: Supports 24 VAC as the power source, one relay that can be used to control an external circuit, and one alarm for physical input into the system.
rReset Button: Reboots the camera or restores the camera's factory default settings. This button is recessed. Use a small tool or a paper clip to press and release the reset button once to reboot the camera. Press and hold the reset button for 10 seconds to restore the camera to the factory default settings.
sMini SD Card Slot: Saves a snapshot image to a mini SD card based on alarm activity.
tService Port: Outputs analog video. Use this port at the installation site to set up the field of view and to focus the camera. When a service cable is connected to the camera, video to the IP stream is disabled.
uPower LED: Glows solid amber and then flashes green during the configuration sequence; glows solid green after the sequence is complete. The LED can be disabled through the user interface. If this LED glows red (solid or flashing), contact Pelco Product Support at
~í Auto Iris Lens Connector: Controls the auto iris lens. Insert the
~â Auto Back Focus Button: Sets the auto back focus mechanism. Press the button once to center the auto back focus mechanism and to fully open the iris. Press and hold the button for three seconds to start the auto back focus mechanism and focus the camera.
~ä NTSC/PAL Button: Toggles the service port between NTSC and PAL formats. The default setting is NTSC.
NOTES:
•Pelco recommends connecting the camera to a network that uses a Dynamic Host Configuration Protocol (DHCP) server to address devices.
•Do not use a HUB in the network setup of the camera.
•To secure access to the IP camera, place the camera behind a firewall when it is connected to a network.
| 3 |