Pelco C1628M-F quick start About This Guide, Connecting the Equipment

Page 2

About This Guide

Thank you for purchasing Pelco’s Endura® workstation with WS5000 advanced system software. This guide provides basic instructions on how to connect your Endura workstation, start the WS5000 advanced system software, monitor live video, and work with recorded video.

For detailed instructions on installing, programming, and using your Endura workstation, refer to the installation and operation manuals included with your unit.

Connecting the Equipment

Refer to Figure 1 as you make the front and back panel connections required to operate this unit:

1. Connect video output (DVI). To connect a VGA monitor to this output, use a DVI-to-VGA adapter plug supplied with the Endura workstation.

2.Connect audio input and output.

3.Connect Cat5e or better network cable to the 1 gigabit RJ-45 network port and to the Endura network.

4.Connect keyboard and mouse to USB ports (front or back panel).

5.Connect power cable to the power connector and a power source.

6.Turn on power.

7.Check indicators.

POWER CONNECTOR

USB 2.0 PORTS

NETWORK

CONNECTOR (RJ-45)

DIGITAL VIDEO (DVI) CONNECTORS

POWER INDICATOR

PRODUCT SERIAL NUMBER STICKER

MICROPHONE IN

AUDIO OUT

AUDIO IN

POWER BUTTON

DVD/CD

DRIVE

CPU ACTIVITY

NETWORK

ACTIVITY

03267-39-0020

 

 

 

 

NETWORK STATUS

 

 

 

 

 

 

 

 

 

 

 

 

UNIT STATUS

CONFIGURATION/

RESET BUTTON

USB 2.0 PORT

Figure 1. Connecting the Endura Workstation

2

C1628M-F (10/07)

Image 2
Contents Quick Start Guide Connecting the Equipment About This GuideLogging On and Off Main ScreenC1628M-F 10/07 Quick Reference Work with CamerasWork with Recorded Video Refer to Help for more details Configure a device Respond to an alarmClick the Setup button ControlsISO9001