LWM41
Legacy® Wall Mount
IMPORTANT SAFETY INSTRUCTIONS
1.Installation and servicing should only be done by qualified service personnel and conform to all local codes.
2.Installation shall be done in accordance with all local and national electrical and mechanical codes utilizing only approved materials.
3.Use only installation methods and materials capable of supporting four times the maximum specified load.
4.Use stainless steel hardware to fasten the mount to outdoor surfaces.
5.To prevent damage from water leakage when installing a mount outdoors on a roof or wall, apply sealant around the bolt holes between the mount and mounting surface.
The product and/or manual may bear the following marks:
WARNING: This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.
DESCRIPTION
The LWM41 wall mount is designed for use with all Legacy® Series pan/tilts, giving your installation a very neat and attractive look. All Legacy Series mounts and optional adapters are finished in a textured gray polyester powder coat to match the pan/tilts and enclosures.
The LWM41 wall mount may be directly attached to any vertical
The LWM41 may also be used with an optional integral receiver (refer to Optional Receiver Models on page 2).
OPTIONAL ADAPTERS
PP300L | Parapet corner adapter mount for LWM41, mounts on rooftops and parapets, rotates 360 degrees, supports |
PP301L | Parapet corner adapter mount for LWM41, mounts to the inside of parapets, rotates 360 degrees, supports |
PA402 | Pole mount adapter for the LWM41, minimum pole diameter 3 inches (7.62 cm), mounting straps not supplied |
PP400 | Parapet mount adapter, maximum parapet width 16 inches (40.64 cm) |
PP4348 | Parapet mount for use with LWM41, mounts to rooftop or horizontal flat surface, supports |
CM400 | Corner mount adapter, supports up to 150 pounds (68 kg) |
OPTIONAL ACCESSORIES
LK4500 | Optional lock kit for LWM41 wall mount arm access panel |