Pelco MR5000L PCM5000 Installation, ICS-DO101ABK Camclosure Integrated Camera System

Page 6

￿Install MR5000 Series Accessories

PCM5000 Light-Duty Camera Mount Assembly

a.The PCM5000 camera mount assembly can be installed on the top or bottom of the MR5000M mount arm. To install the camera assembly onto the MR5000 Series mount, refer to Figure 4 and do the following:

1.Pull video and electrical wire/ cable for the camera out through the end of the mount arm. Make all camera video and electrical connections.

2.Place the end of the camera assembly into the end of the MR5000 Series monitor mount arm. Tighten the set screws to secure the camera assembly.

COLLAR SET SCREWS

MOUNT ARM

 

SET SCREW

01124

b. Refer to the manuals supplied with

Figure 4. PCM5000 Installation

the camera and the PCM5000 for

 

detailed installation and operation

 

instructions.

 

ICS-DO101ABK Camclosure Integrated Camera System

a.Refer to Figure 5 and do the following to attach the adapter plate of the ICS-DO101ABK to the base of the ICS-DO101ABK:

1.Align the adapter plate to the base of the ICS-DO101ABK.

2.Use the two 10-32x .375-inch, pan head screws and internal lock washers to attach the base of the ICS-DO101ABK to the adapter plate.

b.Prepare the video and electrical cabling for the ICS-DO101ABK:

1.Feed the 42-inch video cable (provided) through the monitor feedthrough hole in the mount arm and out the end of the mount arm.

2.Pull power wires through the ICS-DO101ABK feedthrough (refer to Figure 1) located at the bottom of the mount arm. Remove the .50-inch plug if it is installed.

3.Pull wires through the adapter plate of the ICS-DO101ABK and into the base of the ICS-DO101ABK.

4.Use the supplied 3/16-inch Allen wrench to slightly loosen (do not remove) the two 5/16-18 x .75-inch, Allen, pan head screws that secure the MR5000M mount base to the mount arm.

5.Feed the video cable attached to the

ICS-DO101ABK back box through the ICS- DO101ABK feedthrough in the mount arm.

6.Hook the adapter plate

over the loosened screws

ADAPTER PLATE

(refer to Figure 5). Tighten

 

the screws to secure the

CAMCLOSURE BASE

adapter plate to the mount.

c. Refer to the manual supplied

 

with the ICS-DO101ABK for

NOTE: POSITION THE BASE SO THAT THE CONDUIT COVER

detailed installation and

IS TURNED TOWARDS THE BACK OF THE MOUNT.

operation instructions.

01125

 

Figure 5. ICS-DO101ABK Installation

6

Pelco Manual C221M-C (6/03)

Image 6
Contents Page Important Safeguards and Warnings Mrca DescriptionMount Recommended Mounting Surface Recommended Hardware MrwaCable Type Maximum Distance InstallationPrepare Video and Electrical Cabling RG6/UInstall Mount Arm Assemble Monitor RackPosition and Attach Monitor Rack to Mount Arm PCM5000 Installation ICS-DO101ABK Camclosure Integrated Camera SystemPrepare Monitor for Installation Install MonitorConnect Video and Power to Monitor Final Adjustments

MR5000L specifications

The Pelco MR5000L is a standout video surveillance solution, designed to meet the demanding requirements of modern security systems. This robust camera system is primarily manufactured for outdoor applications, providing superior performance in various environmental conditions. With a combination of advanced technology and user-friendly features, the MR5000L stands out in the competitive landscape of surveillance cameras.

One of the main features of the MR5000L is its high-resolution imaging capability. It incorporates a powerful sensor that delivers crisp, clear images even in low-light situations, thanks to its advanced night vision technology. This feature is critical for security operations that require 24/7 monitoring, allowing users to ensure safety without compromising on image quality.

The MR5000L also utilizes advanced video compression technologies, such as H.265 and H.264. These compression algorithms significantly reduce bandwidth consumption while maintaining high video quality. This not only optimizes storage but also facilitates smoother streaming, making it an ideal choice for remote monitoring scenarios where bandwidth may be limited.

Another noteworthy characteristic of the Pelco MR5000L is its weather-resistant design, classified under IP66 standards. This means it is dust-tight and can withstand heavy rain and strong winds, ensuring reliable operation in challenging outdoor environments. Its rugged build ensures longevity and minimal maintenance, making it a favorite among security professionals.

Integration is seamless with the MR5000L. It is compatible with various video management software (VMS) platforms, enabling users to easily incorporate it into their existing surveillance systems. This flexibility allows for comprehensive security solutions tailored to specific needs.

The system also features advanced analytics capabilities. It can detect motion, recognize faces, and analyze behavior patterns, providing valuable insights to security teams. These analytics can help in identifying potential security threats and improving response times, thus enhancing overall safety and situational awareness.

Lastly, the MR5000L supports multiple streaming formats, making it versatile enough for various applications, whether it be retail, transportation, or critical infrastructure security. Its combination of robust features, advanced technologies, and adaptability positions the Pelco MR5000L as a premier choice in the field of outdoor surveillance solutions.