Honeywell 96D user manual Surface Mount Installation

Introduction

Installation Instructions

Surface Mount Installation

It is recommended that controllers be installed 5 feet (1.5 m) above the floor, at approximate eye level.

16 cm

6 5/16”

33.6 cm

13 1/4

1.52 m

5.0 ft

Mark the holes as shown:

•Height markers 6 13/32” apart

•Width markers 10 9/16” apart

•Pre-drill 1/4” mounting holes as needed

•Securely mount the 96D using the appropriate screws

Wiring for the unit must be passed through the knock-outs provided at the bottom of the unit.

M-511401	96d User Manual	11
8/10	Honeywell