Honeywell 96D user manual Creating Groups

System Programming

Groups Menu

Creating Groups

•Use the arrows to move the cursor to a group line and press Enter

•The field can be edited when the brackets stop blinking and the word “end” blinks

•Use the up or down arrows to scroll through the list of all units connected to the 96D, until the desired address is displayed .

•Press Enter again to validate the address.

•The address is added to the group and the <end> bracket is shifted one position to the right.

The process can be repeated until all the desired transmitters in the group (up to 126) have been added. The address for each transmitter added in the Tx Info menu is available when creating groups.

Note: Groups created in the Groups menu will appear in the product type list (Tx Info - Ident screen) as “Group xx” (the number assigned to the group when it was created).

36	96d User Manual	M-511401
	Honeywell	8/10