Honeywell 96D user manual Ident Menu

System Programming

Tx Info Menu

Ident Menu

The Ident, or identification menu allows a component’s network ID to be consulted:

1. Tx Info	001
-Ident-

NotVul

CO2 (IR)

The upper right corner of the screen shows the component’s address. If the address of the device whose information must be viewed is known:

•Use the arrows to move the cursor arrow to the on-screen address

•Press Enter (the value can be edited while the number is flashing)

•Use the up or down arrows to increase or decrease the value

•Press Enter again to validate the entry and display the information for the desired device.

The bottom left corner of the display shows the transmitter name (ex.: 301D2 - product name) and the sensor type (ex.: CH4 - methane sensor). These values can also be changed for Group or Vulbus product types. The procedure is identical for both fields:

Programming or changing a product or sensor type

•Use the arrows to move the cursor to the product type field.

•Press Enter to select the field (the value can be modified when flashing)

•Use the arrows to scroll through the list of product types and press Enter when the desired product or sensor appears

24	96d User Manual	M-511401
	Honeywell	8/10