System Programming
Event Menu
Status
This screen displays the current event status and allows it to be either enabled or disabled, depending on the current status.
Enable event:This is a “toggle” switch; press Enter to change the value from Enable to Disable and vice versa
3. EVENT | 001 |
-Status : disabled- Enable event
.
After going through all the steps and programming an event, this screen will display “Enable event”. Press Enter to activate all the parameters and enable the Event.
If an existing Event is being consulted, this screen would display “Disable event”. Press Enter to disable an Event (it will not be deleted but will not function). The programming of this Event is always present, which means that it easily can be reactivated by scrolling to this screen and pressing Enter.
Database
This screens displays the options linked to the database:
Erase current event:Lets user erase the current event Erase all events:Lets user erase all events
3. Events | 001 |
-Database- Erase current event Erase all events
96d User Manual | 47 | |
8/10 | Honeywell |
|
