System Programming
Config Menu
The fourth screen in the Config menu allows a definition of a day and a week to be programmed.
6. Config
Day definition Week definition
Day and Week definition allows hours (time frames) to be defined for either Daytime and Working Days respectively.
Day definition -Daytime-
sta: 08:00
end: 17:00
Week definition -Working Days-
sta: Monday
end: Friday
Note: Remember, the controller uses a 24 hour clock (0:00 to 23:59). Any time changes (DST) must be made manually or through BACNet time synchronisation (BACNet module required).
58 | 96d User Manual | |
| Honeywell | 8/10 |