Honeywell 96D user manual Getting Started, Initial Startup, Datalogger SDcard

Getting Started

Relay Output

Getting Started

The controller units are customized to the purchaser’s specifications but they can be further programmed using the following menu options.

Initial Startup

Make sure that all wiring has been completed according to specifications in the wiring details before powering up the unit. When all is secure, remove the SHDN jumper to power-up the unit. It should only take a few seconds until the unit is fully operative.

Datalogger (SDcard)

The DLC (Data Logger Card) option for the controller collects data and stores it on a digital Flash memory card (SDCard). In the event that the card memory becomes full:

•Information logging is stopped

•No SDcard flag is displayed on-screen

•The SDcard LED blinks

See the Acquisition section for more details on starting and stopping the datalogging function.

CAUTION

Always deactivate datalogging function before removing the SDcard. Never remove the card when its LED is on.

M-511401	96d User Manual	17
8/10	Honeywell