Ceiling/Wall Mounting | Pelco SS3002 guide

3.4.1 Ceiling/Wall Mounting

NOTE: The “Schneider” ring referred to in these instructions is a 10-inch black aluminum ring designed to fit around the square portion of the up- per dome. Use of this ring helps to camouflage movement of the dome.

NOTE: Disregard step 3 if using the PT280-24SL pan/tilt.

NOTE: When installing a PT280- 24SL pan/tilt with the slip ring option you will need to remove one (1) of the 1/4-20 fasteners holding the mount- ing flange to the SL2800 bracket. Pivot the pan/tilt assembly to one side to allow the connector and cable to pass through. After the connection is made, pull the connector back up into the pipe and reattach the mounting flange.

NOTE: When mounting a long cam- era/lens assembly (13" to 15") into a SS3000 enclosure, it must be mounted to the pan/tilt backwards so the lens is to the rear of the pan/tilt. This is to allow full downward tilt of the long lens. This must also be taken into consideration when wiring the unit, as the motions will be reversed.

NOTE: The small hole in the upper dome (for safety chain attachment) should be positioned at the back (con- nector) end of the camera.

1.Select an appropriate length of 1-1/2" NPT pipe for the mount you have se- lected. Once the mount is installed, insert and tighten the pipe to approxi- mately 30 ft lb, then tighten the 8-32 screw in the pipe nut to lock the pipe threads. Slide the black 10"OD “Schneider” ring over the pipe and then slide the upper dome onto the pipe and lock it out of the way with a suitable retainer.

2.Screw the mounting flange (item 4, Figure 5) onto the pipe and tighten to approximately 20 ft lb. Tighten the 8-32 screw in the pipe nut to lock the pipe threads (refer to Figure 4).

3.Align the three-hole pattern in the pan spindle (PT280-24P) with the holes in the lower bracket (item 5, Figure 5) and attach with 1/4-20 x 5/8" hex head bolts and lock washers provided. Tighten firmly.

4.Assemble the lower bracket and pan/tilt to the mounting flange (item 4, Figure 5) using 1/4" x 5/8" hex head bolts, flat washers, and hex nuts provided.

5.Attach the upper (drive) bracket (item 3) to the bottom (spindle side) of the pan/tilt using four (4) 10-32 x 1/2" pan head screws and lock washers pro- vided. Refer to Figure 5 for proper orientation.

6.Feed the main cable from the control or receiver through the center of the 1-1/2" pipe and connect it to the cable of the pan/tilt. Pull the cable and con- nector back up into the pipe so that it does not get caught on the rotating parts.

7.Install the camera/lens assembly onto the tilt table of the pan/tilt. Connect the proper cables (camera, lens function).

8.Remove the retainers from the upper dome and lower it until it seats itself on the upper (drive) bracket.

Figure 4. Locking the Pipe Nut

PELCO Manual C428M-B (2/98)

SS3002 specifications

The Pelco SS3002 is a highly effective and versatile camera system designed to enhance surveillance and monitoring capabilities in various environments. This model is part of Pelco's renowned line of security solutions, known for their reliability, advanced features, and ease of integration.

One of the standout features of the SS3002 is its exceptional imaging capabilities. With a high-resolution sensor, the camera delivers crystal-clear video footage, ensuring that critical details are captured. This enhanced clarity is crucial for identifying faces, license plates, and other important elements in surveillance scenarios. The SS3002 also supports advanced low-light performance, utilizing infrared technology to ensure effective monitoring even in complete darkness.

The Pelco SS3002 offers robust connectivity options, including both analog and digital interfaces. This flexibility allows for seamless integration into existing security systems, accommodating various configurations depending on the user's needs. The camera supports digital streaming protocols, which provides the option of remote viewing and management via compatible devices, allowing security personnel to monitor real-time footage from anywhere.

Another notable characteristic of the SS3002 is its durable design. Built to withstand challenging environmental conditions, this camera is often equipped with weather-resistant housing. This feature is paramount for outdoor applications where cameras must endure exposure to the elements, such as rain, wind, and extreme temperatures. The SS3002’s rugged construction ensures longevity and reliable performance throughout its operational life.

The camera also includes advanced motion detection capabilities, capable of triggering alerts when movement is detected in specified zones. This technology minimizes false alarms and enhances the system's overall efficiency by ensuring that only relevant incidents are recorded and reported.

Additionally, the Pelco SS3002 supports various intelligent video analytics features. These capabilities allow for sophisticated analysis such as intrusion detection, line crossing monitoring, and object counting, which can significantly bolster security operations and improve response times to potential threats.

Overall, the Pelco SS3002 camera stands out in the security market due to its high-definition imaging, robust connectivity, durable design, advanced motion detection, and intelligent surveillance analytics. Its combination of cutting-edge technology and reliable performance makes it a preferred choice for security professionals seeking an efficient and effective surveillance solution. Whether installed in commercial buildings, transportation hubs, or public spaces, the SS3002 provides comprehensive surveillance coverage to ensure safety and security.