Pelco 90 manual Parts List, Qty Description

Page 6

Description

The ICS090 Series Camclosure® integrated camera system integrates a camera and lens package in a small, discreet dome. The system is easy to install and can be mounted or recessed to the surface of a ceiling or wall.

Prior to the installation of your new system, thoroughly familiarize yourself with the information in this manual.

PARTS LIST

The following materials are supplied with the 090 Series Camclosure integrated camera system:

Qty Description

1Assembled ICS090 Series Camclosure (back box, smoked dome bubble, and camera module)

1Clear dome bubble

1Plastic liner

1Adapter plate

28-32 x 1.00-inch Phillips pan head screws

28-32 x 0.750-inch self-tapping screws

28-32 x 2.50-inch self-tapping screws

210-32 x 1.50-inch self-tapping screws

6

C2462M-D (3/08)

Image 6
Contents Series Camclosure Indoor Integrated Camera System Page Contents List of Illustrations Important Safety Instructions Regulatory NoticesParts List DescriptionQty Description How to Remove the Dome Bubble Remove the Dome BubbleInstall the Back Box Installation to Surface of a CEILING/WALLVoltage Red Wire Black Wire Ceiling/Wall Installation IN-CEILING Installation Suspended Ceiling How to Remove Surface Mount Ring from Back Box IN-CEILING Installation Fixed CEILING/WALL In-Ceiling Installation to a Fixed Ceiling/WallInstallation to the Surface of a 4S Standard Electrical BOX 24 VACInstallation in a 4S Deep Electrical BOX Deep Electrical Box InstallationCamera Positioning Positioning the CameraCamera Adjustments Switch SettingsALC/ELC switch Always ELC DC switch Not used Vertical Phase Adjustment 24 VAC Operation only Adjusting the Phase ControlReinstall the Dome Bubble Dome Liner InstallationDome Bubble Installation Installing the Dome BubbleService Connector Connecting the Monaural Headphone Plug to the Coaxial CableSpecifications BackboxPage Product Warranty and Return Information ISO9001