Appendix A: Front Panel Indicators
Figure 55 shows the DVR5100 front panel.
|
Figure 55. DVR5100 Front Panel Indicators
Table H lists the DVR5100 front panel controls and indicators:
Table H. DVR5100 Front Panel Features
Pelco Badge (power indicator) 
:
The Pelco badge, on the left side of the unit, glows blue when the unit has power. Behind the front bezel, the power indicator LED is white.
DVD: The DVD drive that allows you to import/export video to and from the DVR, and load/install DVR software updates.
USB Port: Connect the USB PC keyboard and mouse, or insert a USB device to capture snapshots and exported video clips.
Control Pad: Controls the basic unit operations with the following features: function buttons, Joystick, Plus (+) and Minus
Hard Disk Drive Indicator | : The hard disk drive (HDD) status indicator flashes yellow when there is HDD activity. | |
Network Activity Indicator | : The network activity indicator flashes green when the unit is sending or receiving network | |
data. |
|
|
Power Button | : Use the power button to turn the unit on or off. | |
Network Status Indicator | : The network status LED indicates the network connection and speed. It may display one of the | |
following conditions: |
|
|
•Off: The unit is not connected to the network.
•Solid Green: The unit is connected to the network using the
•Solid Yellow: The unit is connected to the network using the
•Solid Red: The unit is connected to the network using the
Unit Status Indicator 
: The unit status is indicated by one of the following three colors:
•Green: The unit is functioning normally.
•Yellow: The unit is in configuration mode.
•Red: The unit is in an error condition.
Configuration/Reset Key: Reserved for future use.
48 |