plawa-feinwerktechnik GmbH & Co.KG Nox 1.3 manual Turning the Camera On and Off

Page 5

• Attaching the Hand Strap

• Using Docking Station

• Recharging the Battery

Rechargeable battery is integrated in the camera, follow the following steps to recharge the battery.

1. Plug the labelled end

of the USB cable into the socket marked

on your computer.

2.Plug the other end of the USB cable into the USB port on Docking Station. The Status LED on Docking station will be on.

3.Place the camera into Docking Station. For further detail please refers to Using Docking Station.

4.The battery begins charging.

5.It takes three hours to fully recharge the battery each time.

NOTE:

• Please fully recharge the battery for up to ten hours before you use the camera for the first time after purchase.

• The battery is non-replaceable, you can recharge the battery approximately 250 ~ 280 times.

• Turning the Camera On and Off

Status LED

Power button

Fully press and hold the Power button until the status LED turns green and the camera is on. Press and hold the Power button again, the camera will be off.

• Checking the Battery Level

Check the battery power level before taking pictures.

1.Turn the camera on.

2.Check the power status level that appears on the camera LCD screen.

Battery has adequate power.

Battery needs to be recharged.

• Automatic Power Off Saves Battery

The camera is designed to switch off automatically after 30 seconds of inactivity to save battery life.

NOTE:

Auto power off is automatically disabled under the following condition: while the camera’s USB cable is connected to a computer or other external device, or while the camera is being controlled by an external device.

5

Image 5
Contents NOX Shutter button SD Secure Digital Card Slot USB port Product OverviewTable of Contents Getting Started Camera Package ContentsWhat can I do with my Camera? What can I do with my Digital Pictures?Turning the Camera On and Off Checking the Battery LevelAutomatic Power Off Saves Battery Setting the Beep Sound On and Off Camera SettingReset Feature Checking Camera StatusTaking Pictures Setting the 2X Digital ZoomTaking a Picture Taking Continuous PicturesSetting Quick View Setting Flash ModeSetting Sharpness Setting BrightnessSetting White Balance Setting Exposure CompensationSetting Self-timer Setting the Image QualityPlayback Pictures and Video Clips Recording Video ClipsRecording Video Clips Turning Picture/Video Clip Information Display On/OffSelect area to zoom Reviewing the PicturesZooming the Displayed Picture Deleting One Picture/Video Clip Reviewing the pictures in ThumbnailPlaying the Video Clip Using the SD Secure Digital Card Using SD CardDeleting All Pictures/Video Clips Inserting the SD Secure Digital CardTo Format a Memory Card or Internal Memory Memory Card PrecautionsSoftware Included with Your Camera Installing the Software onto a ComputerInstalling the Software ArcSoft PhotoPrinter 2000 Picture Printing Software Computer System RequirementsArcSoft VideoImpression 1.6 Movie Making Software Microsoft NetMeeting Web Cam softwareTransferring Pictures, Video Clips to Your Computer Connecting to Your ComputerBefore You Transfer Pictures Mass Storage/WDMStart NetMeeting Using the Camera as a Web CamSetting up NetMeeting Symptom Problem Solution Troubleshooting ProblemsGetting Help Technical SpecificationsAppendix ArcSoft Software HelpUninstalling the Camera DriverPC Tips, Your Safety & MaintenanceRegulatory Information Camera CautionsSPYPENPart No. OM837592 R1