Yamaha CRW-F1-NB manual Technical Notes Session-at-Once SAO, Packet Writing

Page 50

Technical Notes

Session-at-Once (SAO)

This method is used to write data on a disc on a session-by-session basis. Unlike Track-at-Once described above, Session-at-Once enables you to record multiple tracks onto a disc at a time. CD EXTRA, for example, uses this method to write multiple pieces of audio data (or multiple tracks) in the first session and information required for computers in the second session. This method enables you to add data into the same disc, one session at a time, as long as there is free space available on the disc. A disc that contains data written in several sessions by this method is defined as a multi-session disc, like a disc written by the Track-at-Once method.

Packet Writing

This method is used to record data onto a disc on a file-by-file basis. This method divides a track into small segments called “packets” so that data can be written on a packet-by-packet basis, which means that you can write data in much the same way as you copy data to a floppy or hard drive. Since the data can be written easily, packet writing is proper to daily data backup. Packet writing also enables you to add packets to a disc as long as there is free space available on the disc.

Note

Discs need to be formatted for packet writing prior to use.

Formatting a CD-RW disc using packet writing software reduces its storage capacity by about 100MB since packet writing requires exclusive space for itself.

For CD-R discs, deleting data means masking data but not actually removing data. Therefore, actual free space in a CD-R never be increased even if data is deleted.

Audio Master Quality Recording (High quality audio writing mode)

This method enables you to record high quality data that can be played back with the 1.4 m/s linear velocity.

Note

Audio Master Quality Recording is enabled with the 1X-, 4X-, or 8X-speed Disc-at- Once writing method.

Maximum recording time is 63 minutes for a 650MB CD-R disc and 68 minutes for a 700MB CD-R disc.

Audio CDs that are created with Audio Master Quality Recording may not be played back on certain audio recorders and CD-R/RW drives.

41

Image 50 Contents
Page FCC Information U.S.A Achtung Page English Safety Precautions Iii Warranty Precautions for TransportationTable of Contents High speed writing/reading Features of the CRW-F1 DriveDiscT@2 SafeBurn Enhanced stability writing technologyNames and Functions of Parts Front PanelRear Panel Names and Functions of PartsCopyright Precautions on UseHandling Discs Disclaimer of IndemnityRecordable disc type Compatible DiscsDisc shape High Speed CD-RW discs CD-RW discsWriting/Rewriting speed Ultra Speed CD-RW discs Image file System RequirementsComputer PC/AT compatible Operating systemPreparing tools Preparing the CRW-F1 DriveSerial Number Serial NumberDecide the Installation Method Turn off and unplug the computerReplacing an existing IDE device with the CRW-F1 drive Examples of connecting the CRW-F1 drive Example 1 As a secondary slave For additional drivePreparing the CRW-F1 Drive Enhanced-IDE E-IDEPage Set the Jumper Switch Cable Select Csel Replacing Install the CRW-F1 DriveInstalling the CRW-F1 drive as an additional drive Connect a 40-pin IDE cable Connect an audio cable if necessary Audio CD playbackAnalog connection Digital connection Top Power connector Bottom Check Recognition of the CRW-F1 Drive For Windows XPFor Windows 95/98/98 Second Edition/Me If the drive name is not shown or there is or markFor Windows 2000 Professional For Windows XP/2000 Professional Direct Memory Access DMA Install CD Writing SoftwareRecommended DMA settings transfer mode settings Loading/Ejecting a Disc Manually Ejecting a Disc Is the IDE cable connected properly to the CRW-F1 drive? TroubleshootingCRW-F1 drive is not recognized by the operating system. P Is the IDE cable connected properly to the motherboard?Is each IDE device set respectively? Disc tray does not open when you press the eject buttonIs the disc tray opened when the computer is restarted? Is the CRW-F1 drive recognized by the operating system? PNo data can be read from a disc Check that the volume is not set to the minimum level Playback of an audio CD CD-DA is inaudibleFor Windows Me Error message Buffer Underrun is displayed Other problemsIs the power capacity of your computer sufficient? Firmware Checking the firmware version in your CRW-F1 driveCRW-F1 Drive Specifications Supported Formats Write Read Play back *4Data Transfer Rate Mode CRW-F1 Drive Specifications Safety/EMC Compliance CRW-F1 drive conforms to the following specificationsWriting Methods Technical NotesBuffer Underrun Protection Function Disc-at-Once DAOTechnical Notes Session-at-Once SAO Packet WritingPartial CAV Constant Linear Velocity CLVConstant Angular Velocity CAV Page Canada