Zoom 100 quick start Getting Started, Taking a Picture

Page 6

Getting Started

Inserting or Replacing the Batteries

Make sure to power OFF the camera before you change the batteries.

Slide the compartment cover open and insert/replace the 2 AAA alkaline batteries. After inserting/replacing the batteries, you can immediately use the camera. Always make sure to download pictures before your batteries run out.

Loss of battery charge may result in loss of stored pictures.

Connect to PC

If you want the camera to work as a PC camera, or if you want to download pictures to your PC, you simply use the included USB cable to connect the camera to the USB port of your PC. This camera is compatible with NetMeeting and other Windows based Video Conferencing applications.

Taking a Picture

 

The display should show a number, it should not be blank

 

or show a symbol. If the screen is blank, press the Mode

Mode Button

Button once to turn on the camera. If a symbol is

 

displayed, press the Mode Button until a number appears

 

on the display.

Snapshot

Press Snapshot button once to take one image.

Image 6
Contents ZoomCam Quick Start Guide Page Getting to Know the Camera Software Installation Install Ulead Photo ExpressRemoving the Camera’s Software and Driver To Remove Camera Application SoftwareGetting Started Taking a PictureCamera Display Panel 00 toPage Technical Support Contacting Zoom by E-mailLimited Warranty 617CE Compliance Statement 0113A 27278 2003