Using Flash Light, Setting Picture size

• Using Flash Light

When you take pictures at night, indoors, or outdoors in heavy shadows, please use the flash. Push the joystick left repeatedly to scroll through the flash options.

The flash icon that is displayed on the TFT panel is the active option.

Off—flash never fires. (Default)

Auto Flash—flash fires when the lighting conditions require it.

Force Flash—flash fires every time you take a picture, regardless of the lighting

conditions.
Note: Flash is deactivated at Macro mode and you will see the icon	on the TFT

• Setting Picture size

Use the Quality setting to select a picture resolution:

1.Make sure the TFT Panel display , and then press the Menu button.

2.You will see the [Size] option is selected (default), press the OK button to activate the submenu; push the joystick up or down to select the picture size.

7M (3072 x 2304) —for enlarged picture size; produces higher picture resolution and larger file size.

5M (2560x1924) —for bigger picture size; produces normal picture resolution and large file size.

3M (2048x1536) —for big picture size; produces normal picture resolution and large file size.

2M (1600x1200) — for small picture size; pictures are of lower resolution and file size is smaller.

3.Press the Menu button to confirm to return to capture status and you will see the icon 7M/5M/ 3M/2M on the TFT panel.

Note: 1.This setting remains until you change it.

2.Movies can be shot with the CIF (320 x 240) or VGA (640 x 480) resolution.

- 12 -