Pelco DX8000-MUX16 installation manual Secondary Capture Card Video Input Cable

Page 17

b.Connect the front video input ribbon cable from the secondary capture card to the connector on the daughter board of the DX8000-MUX16. Refer to Figure 14.

5b

Figure 14. Secondary Capture Card Video Input Cable

C1601M (6/04)

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents DX8000-MUX16 Installation Manual Page Tools Needed IntroductionGetting Ready Removing Power Cord from WallRemoving Power Cord from Unit ESD Protection Open the Unit Chassis Prepare the UnitRemoving Chassis Cover Component Layout Remove the Rear CROSS-BRACE Moving Rear Cross-Brace to Rear of Unit Location of PCI Slot Install the DX8000-MUX16 CardSlot Cover for PCI Slot Inserting the DX8000-MUX16 Card into PCI Slot Securing the DX8000-MUX16 Card Primary Capture Card Video Input Cable Secondary Capture Card Video Input Cable Video Data Cable Connections Replacing Front Cross-Brace Reassemble the UnitReplacing Chassis Cover DX8000-MUX16 04117-47E-ED01 Restarting the Unit Product Warranty and Return Information ISO9001
Top Page Image Contents