Cable Clamp
When the lens and camera are mounted on the large lens adapter it is necessary to clamp the camera cable. Proceed as follows:
a.Loosen the cable clamp on the right side of the footbed by turning it counterclockwise.
b.Put the cable into the clamp.
c.Tighten the cable clamp by turning it clockwise.
Mounting the Viewfinder
To mount the viewfinder on top of the large lens adapter proceed as follows:
a.Slide the viewfinder along the rails on top of the camera until it can go no further.
b.Push both locking levers inwards and slide the viewfinder until it firmly engages the connector.
c.Release the locking levers and ensure they click into the lock position.
d.Loosen the viewfinder mount retaining knob on top of the large lens adapter.
e.Slide the viewfinder mount along the rails until it is in the desired position.
f.Tighten the viewfinder retaining knob on top of the large lens adapter.
Mounting the Scriptboard
To mount the scriptboard onto the large lens adapter, proceed as follows:
a.Mount the separately delivered scriptboard quick mounting pin to the scriptboard clamp of the large lens adapter. Tighten with screw 6 and secure with screw 738. The scriptboard clamp can be mounted on the right as well as on the left side of the large lens adapter. The scriptboard quick mounting pin can also be mounted on top of the camera.
b.Click the scriptboard over the quick mounting pin.
Quick mounting pin
Scriptboard clamp
736
Rain and Off-use Cover
The rain and
Dimensions
The dimensions of the large lens adapter are:
Length: 600 mm
Width: 350 mm
Height: 390 mm
The weight of the large lens adapter does not exceed
17Kg (excluding lens, camera and
02.38.3 | User's Guide LDK 4482 - SuperXpander |