Technicolor - Thomson VMD 6 user manual Some DO’S and DON’TS on the Safe USE of Equipment

Page 4

E N 3

Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.

CAUTION!

The following notes concern possible physical damage to the camcorder and to the user.

When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying or holding the camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a malfunction. Take care not to get your finger caught in the cassette holder cover. Do not let children operate the camcorder, as they are particularly susceptible to this type of injury.

Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder.

CAUTION!

Connecting cables (Audio/Video, S-Video, Editing, DC, etc.) and then leaving it on top of the TV is not recom- mended, as tripping on the cables will cause the camcorder to fall, resulting in damage.

This camcorder is designed exclusively for the digital video cassette and MultiMediaCard. Only cassettes marked

” and memory cards marked “” can be used with this unit.

Before recording an important scene . . .

 

..... make sure you only use cassettes with the Mini DV mark

.

..... make sure you only use memory cards with the mark

.

..... remember that this camcorder is not compatible with other digital video formats.

..... remember that this camcorder is intended for private consumer use only. Any commercial use without proper

permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way — switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the

manufacturer’s approved stand or legs with the fixings provided according to the instructions. DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

NEVER let anyone especially children push anything into holes, slots or any other opening in the case — this could result in a fatal electrical shock;

NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

VMD6 EN(02/39)

3

28/08/00, 15:46

Image 4
Contents VMD VMD6 Dear Customer It is recommended that youSome DO’S and DON’TS on the Safe USE of Equipment AC Power Adapter Remote Control Unit Shoulder Strap AAA R03 Battery xTC 200 M BAT Cable Adapter MultiMediaCard 16 MB Editing CableHow To Attach The Core Filter Release the stoppers on both ends of the Core FilterStopper Wind oncePower Charging the Battery PackLithium-ion is vulnerable in colder temperatures Charge indicatorUsing the Battery Pack Using AC PowerTo Detach The Battery Pack Approximate recording timeGrip Adjustment Viewfinder AdjustmentShoulder Strap Attachment Tripod MountingDate/Time Settings MENU/BRIGHT Wheel Power Switch Power lamp DisplayPress MENU/BRIGHT. The Menu Screen appears Lock Button10 EN Loading/Unloading a CassetteErase protection tab Cassette holderLoading a MultiMediaCard To Unload a MultiMediaCardCard Cover MultiMediaCardRecording Mode Setting Picture Quality Mode SettingSet the tape recording mode depending on your preference 12 ENOperation Mode Power Switch Position ManualVIDEO/DSC Switch Position Full AutoTo Adjust The Brightness Of The Display 14 ENWhile recording is in progress To Stop RecordingSELF-RECORDING Journalistic ShootingSelf-Recording Power Switch Snapshot For Video Recording Snapshot Mode Selection16 EN Recording Basic Recording For VideoBasic Shooting Snapshot Available Snapshot modes are the same as those on pgImage is stored in the MultiMediaCard To Delete Unwanted Still ImagesSlide the Power Zoom Lever towards T 18 ENZoom Zoom OutWhen a blank portion is recorded on a tape Proper recordingFeature Video Light To brighten the scene when natural lighting is too dimBasic Recording For Video And D.S.C. Set Light OFF/AUTO/ON as requiredFeature Manual Focus Feature Auto FocusTo obtain correct focus EN Recording Advanced Features For Video And D.S.C. Using Menus For Detailed AdjustmentSee pg Go to stepMenu Screen Explanations When shooting subjects with vertical or horizontal stripes When shooting dark or dim subjectsWhen shooting subjects with excessive backlighting When shooting scenes with movement in various directionsDoes not reset all settings to the factory-preset Resets all settings to the factory-presetSound will change. This is normal Appearing on the connected TV screenFade/Wipe Effects To Deactivate The Selected EffectSelect OFF in step If you select Picture Wipe/Dissolve during recordingFader And Wipe Menu MenuTo Deactivate The Selected Mode Programme AE With Special EffectsSlow Slow Shutter SlowExposure Control Iris LockWhite Balance Adjustment MENU/BRIGHT Wheel White paper Power SwitchManual White Balance Operation To Return To Automatic White BalanceTo Control The Speaker Volume Available only with the remote control provided  pgPlayback Basic Playback For Video Playback Zoom and Playback Special EffectsUsing Menus For Detailed Adjustment DATE/TIME setting Playback SoundDisplay For date/time For time codePower Switch to 34 ENPlayback Basic Playback For D.S.C Normal PlaybackIndex Screen Index PlaybackPlayback Advanced Features For D.S.C 36 ENSlide Show After , press 4/6. To stop the Slide Show, pressProtecting Images To Protect AN ImageTo Remove Protection Before doing the following, perform steps 1 through 3 aboveTo Delete ALL Images MENU/BRIGHT Wheel Deleting ImagesDeletion ScreenInitialising a MultiMediaCard You can initialise a MultiMediaCard anytime40 EN If using a VCR . . . go to step If not . . . go to step When an S-VideoAudio cable is not required for watching still Cable is not used42 EN Connection To a Personal Computer Make sure the camcorder and PC are turned offDubbing To a VCR 44 ENVCR Recording deck EN45 To use this camcorder as a playerIndicator disappears when dubbing is complete 46 ENDubbing Images Stored In a MultiMediaCard To a Tape Rewind Button Fast-ForwardDubbing Images Recorded On a Tape To a MultiMediaCard Mode ButtonWheel Lock Button Installing The Batteries 48 ENTab Remote sensorFunctions Buttons With the camcorder’s Power Pause in ConnectorZoom T/W Buttons Display ButtonFeature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Zoom 50 ENFeature Playback Special Effects Menu52 EN Random Assemble Editing R.A.EditSET REMOTE/VCR Code You are now ready to try Random Assemble EditingMake Connections Thomson VCR equipped with a remote pause connectorVCR other than above 54 EN Select ScenesProgramme Editing MenuAutomatic Editing to VCR 56 EN For More Accurate EditingDiagnosing VCR/CAMCORDER Timing Recording deckAdjustment of VCR/CAMCORDER Timing MENU/BRIGHT Wheel DisplaySet 12BIT Mode to Sound 2 or MIX Menu Screen  pg 6e Audio Dub Standby mode Speaker Power Switch58 EN Audio DubbingCorrective Action Clean the lens and checkDark place, or the contrast Focus again  pg Was low Troubleshooting 60 ENEN61 62 EN Or channel appropriate Video mode For video playback Blink64 EN After Use Cleaning The Camcorder Press Battery Release and remove the battery packTurn off the camcorder Press Push Here to close the cassette holder66 EN 345 6 7 # $ %Power Zoom Lever T/W  pg Snapshot Mode Button# Power Switch  pg OFF VIDEO/DSC Switch Video  pg Video Light Switch68 EN Appears when Digital Image Stabiliser DIS is engaged Automatically adjustedApproximate zoom ratio Appears during Zooming @* Displays the brightness of the LCD monitorEnindex Indications LCD Monitor/Viewfinder Indications During Video PlaybackLCD Monitor/Viewfinder Indications During D.S.C. Playback 5Displays the time codeFunction When the MultiMediaCard is not formatted Error indications E01 E06 show what type of malfunction hasIndications Function Is set toDo not expose the battery to temperatures To prevent damage and prolong service lifeTo avoid hazards Do not modify or disassemble74 EN About moisture condensation To protect the unit, do notSerious malfunctioning 76 EN Date/Time Display  pg , 32Icons  pg LCD monitor/Viewfinder  pg IndicationsEN77 Time Code  pg , 25, 3278 EN CamcorderFor General For Digital Video CameraFor Connectors AC Power Adapter/Charger AC600For Digital Still Camera 80 EN LYT0665-001A

VMD 6 specifications

The Technicolor - Thomson VMD 6 is a sophisticated video module designed for advanced video processing and distribution applications. Known for its reliability and high performance, the VMD 6 is widely utilized in broadcast, multimedia, and video surveillance systems. Its robust architecture ensures that it meets the demanding requirements of contemporary content delivery networks.

One of the standout features of the VMD 6 is its ability to support various video formats, including SD, HD, and even 4K resolutions. The module is equipped with an automated format detection system that simplifies the integration of different video sources, making it adaptable to various workflows. This versatility is crucial in environments where multiple video streams must be handled simultaneously without compromising quality.

The VMD 6 leverages advanced compression technologies to efficiently encode and decode video streams. It incorporates industry-standard codecs such as H.264 and H.265, enabling high-quality video streaming while minimizing bandwidth usage. This compression capability is particularly beneficial for delivering content over constrained networks, ensuring seamless playback regardless of connection quality.

Another key characteristic of the Technicolor - Thomson VMD 6 is its real-time processing capabilities. The module features low-latency processing, which is essential for live broadcasts and interactive applications. Its architecture allows for frame-accurate editing and timing synchronization, making it an ideal choice for broadcast studios and post-production facilities.

The user interface of the VMD 6 is designed for ease of use, providing operators with intuitive control over the module’s features. With comprehensive monitoring options, users can track video quality metrics and system performance in real-time, enabling proactive maintenance and troubleshooting.

In terms of connectivity, the VMD 6 offers multiple input and output options, including HDMI, SDI, and IP streaming. This ensures compatibility with a wide range of external devices and simplifies integration into existing infrastructures.

Overall, the Technicolor - Thomson VMD 6 stands out as a versatile and powerful video module. Its support for various video formats, advanced compression capabilities, real-time processing features, and user-friendly interface make it an invaluable asset for any organization looking to enhance its video processing and distribution efficiencies. This module represents a significant advancement in video technology, catering to the needs of contemporary media environments.