Technicolor - Thomson VMD 6 user manual AC Power Adapter/Charger AC600, For Digital Still Camera

Page 80

EN79

For Digital Still Camera

Storage media

: MultiMediaCard

Compression system

: JPEG (compatible)

File size

: VGA: 640 x 480 pixels

Picture quality

: 2 modes (FINE/STANDARD)

Approximate number of storable images

(with an optional MultiMediaCard [8 MB])

FINE

: 100

STANDARD

: 200

(with the provided MultiMediaCard [16 MB])

FINE

: 200

STANDARD

: 400

For Connectors

S

: Y : 1 V (p-p), 75 Ω , analogue output

 

C : 0.29 V (p-p), 75 Ω , analogue output

AV

 

Video output

: 1 V (p-p), 75 Ω , analogue

Audio output

: 300 mV (rms), 1 kΩ , analogue, stereo

DV

 

Input/output

: 4-pin, IEEE 1394 compliant

PC (DIGITAL PHOTO)

 

Digital still output

: ø2.5 mm, 3-pole

JLIP/EDIT

: ø3.5 mm, 4-pole

AC Power Adapter/Charger AC600

Power requirement

: AC 110 V to 240 V`, 50 Hz/60 Hz

Power consumption

: 23 W

 

 

Output

 

 

 

Charge

: DC 7.2 V

 

, 1.2 A

 

VTR

: DC 6.3 V

 

, 1.8 A

 

Dimensions (W x H x D)

: 68 mm x 38 mm x 110 mm

Weight

: Approx. 260 g

Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to change without notice.

VMD6 EN(40/80)

79

28/08/00, 16:09

Page 79 Page 81
Image 80
Page 79 Page 81
Contents VMD VMD6 Dear Customer It is recommended that youSome DO’S and DON’TS on the Safe USE of Equipment AC Power Adapter Remote Control Unit Shoulder Strap AAA R03 Battery xTC 200 M BAT Cable Adapter MultiMediaCard 16 MB Editing CableHow To Attach The Core Filter Release the stoppers on both ends of the Core FilterStopper Wind oncePower Charging the Battery PackLithium-ion is vulnerable in colder temperatures Charge indicatorUsing the Battery Pack Using AC PowerTo Detach The Battery Pack Approximate recording timeGrip Adjustment Viewfinder AdjustmentShoulder Strap Attachment Tripod MountingDate/Time Settings MENU/BRIGHT Wheel Power Switch Power lamp DisplayPress MENU/BRIGHT. The Menu Screen appears Lock Button10 EN Loading/Unloading a CassetteErase protection tab Cassette holderLoading a MultiMediaCard To Unload a MultiMediaCardCard Cover MultiMediaCardRecording Mode Setting Picture Quality Mode SettingSet the tape recording mode depending on your preference 12 ENOperation Mode Power Switch Position ManualVIDEO/DSC Switch Position Full AutoTo Adjust The Brightness Of The Display 14 ENWhile recording is in progress To Stop RecordingSelf-Recording Journalistic ShootingSELF-RECORDING Power Switch Snapshot For Video Recording Snapshot Mode Selection16 EN Recording Basic Recording For VideoBasic Shooting Snapshot Available Snapshot modes are the same as those on pgImage is stored in the MultiMediaCard To Delete Unwanted Still ImagesSlide the Power Zoom Lever towards T 18 ENZoom Zoom OutWhen a blank portion is recorded on a tape Proper recordingFeature Video Light To brighten the scene when natural lighting is too dimBasic Recording For Video And D.S.C. Set Light OFF/AUTO/ON as requiredTo obtain correct focus Feature Auto FocusFeature Manual Focus EN Recording Advanced Features For Video And D.S.C. Using Menus For Detailed AdjustmentSee pg Go to stepMenu Screen Explanations When shooting subjects with vertical or horizontal stripes When shooting dark or dim subjectsWhen shooting subjects with excessive backlighting When shooting scenes with movement in various directionsDoes not reset all settings to the factory-preset Resets all settings to the factory-presetSound will change. This is normal Appearing on the connected TV screenFade/Wipe Effects To Deactivate The Selected EffectSelect OFF in step If you select Picture Wipe/Dissolve during recordingFader And Wipe Menu MenuTo Deactivate The Selected Mode Programme AE With Special EffectsSlow Slow Shutter SlowExposure Control Iris LockWhite Balance Adjustment MENU/BRIGHT Wheel White paper Power SwitchManual White Balance Operation To Return To Automatic White BalanceTo Control The Speaker Volume Available only with the remote control provided  pgPlayback Basic Playback For Video Playback Zoom and Playback Special EffectsUsing Menus For Detailed Adjustment DATE/TIME setting Playback SoundDisplay For date/time For time codePower Switch to 34 ENPlayback Basic Playback For D.S.C Normal PlaybackIndex Screen Index PlaybackPlayback Advanced Features For D.S.C 36 ENSlide Show After , press 4/6. To stop the Slide Show, pressProtecting Images To Protect AN ImageTo Remove Protection Before doing the following, perform steps 1 through 3 aboveTo Delete ALL Images MENU/BRIGHT Wheel Deleting ImagesDeletion ScreenInitialising a MultiMediaCard You can initialise a MultiMediaCard anytime40 EN If using a VCR . . . go to step If not . . . go to step When an S-VideoAudio cable is not required for watching still Cable is not used42 EN Connection To a Personal Computer Make sure the camcorder and PC are turned offVCR Recording deck 44 ENDubbing To a VCR EN45 To use this camcorder as a playerIndicator disappears when dubbing is complete 46 ENDubbing Images Stored In a MultiMediaCard To a Tape Rewind Button Fast-ForwardWheel Lock Button Mode ButtonDubbing Images Recorded On a Tape To a MultiMediaCard Installing The Batteries 48 ENTab Remote sensorFunctions Buttons With the camcorder’s Power Pause in ConnectorZoom T/W Buttons Display ButtonFeature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Zoom 50 ENFeature Playback Special Effects Menu52 EN Random Assemble Editing R.A.EditSET REMOTE/VCR Code You are now ready to try Random Assemble EditingVCR other than above Thomson VCR equipped with a remote pause connectorMake Connections 54 EN Select ScenesProgramme Editing MenuAutomatic Editing to VCR 56 EN For More Accurate EditingDiagnosing VCR/CAMCORDER Timing Recording deckAdjustment of VCR/CAMCORDER Timing MENU/BRIGHT Wheel DisplaySet 12BIT Mode to Sound 2 or MIX Menu Screen  pg 6e Audio Dub Standby mode Speaker Power Switch58 EN Audio DubbingDark place, or the contrast Focus again  pg Was low Clean the lens and checkCorrective Action Troubleshooting 60 ENEN61 62 EN Or channel appropriate Video mode For video playback Blink64 EN After Use Cleaning The Camcorder Press Battery Release and remove the battery packTurn off the camcorder Press Push Here to close the cassette holder66 EN 345 6 7 # $ %Power Zoom Lever T/W  pg Snapshot Mode Button# Power Switch  pg OFF VIDEO/DSC Switch Video  pg Video Light Switch68 EN Appears when Digital Image Stabiliser DIS is engaged Automatically adjustedApproximate zoom ratio Appears during Zooming @* Displays the brightness of the LCD monitorEnindex Indications LCD Monitor/Viewfinder Indications During Video PlaybackLCD Monitor/Viewfinder Indications During D.S.C. Playback 5Displays the time codeFunction When the MultiMediaCard is not formatted Error indications E01 E06 show what type of malfunction hasIndications Function Is set toDo not expose the battery to temperatures To prevent damage and prolong service lifeTo avoid hazards Do not modify or disassemble74 EN Serious malfunctioning To protect the unit, do notAbout moisture condensation 76 EN Date/Time Display  pg , 32Icons  pg LCD monitor/Viewfinder  pg IndicationsEN77 Time Code  pg , 25, 3278 EN CamcorderFor General For Digital Video CameraFor Digital Still Camera AC Power Adapter/Charger AC600For Connectors 80 EN LYT0665-001A

VMD 6 specifications

The Technicolor - Thomson VMD 6 is a sophisticated video module designed for advanced video processing and distribution applications. Known for its reliability and high performance, the VMD 6 is widely utilized in broadcast, multimedia, and video surveillance systems. Its robust architecture ensures that it meets the demanding requirements of contemporary content delivery networks.

One of the standout features of the VMD 6 is its ability to support various video formats, including SD, HD, and even 4K resolutions. The module is equipped with an automated format detection system that simplifies the integration of different video sources, making it adaptable to various workflows. This versatility is crucial in environments where multiple video streams must be handled simultaneously without compromising quality.

The VMD 6 leverages advanced compression technologies to efficiently encode and decode video streams. It incorporates industry-standard codecs such as H.264 and H.265, enabling high-quality video streaming while minimizing bandwidth usage. This compression capability is particularly beneficial for delivering content over constrained networks, ensuring seamless playback regardless of connection quality.

Another key characteristic of the Technicolor - Thomson VMD 6 is its real-time processing capabilities. The module features low-latency processing, which is essential for live broadcasts and interactive applications. Its architecture allows for frame-accurate editing and timing synchronization, making it an ideal choice for broadcast studios and post-production facilities.

The user interface of the VMD 6 is designed for ease of use, providing operators with intuitive control over the module’s features. With comprehensive monitoring options, users can track video quality metrics and system performance in real-time, enabling proactive maintenance and troubleshooting.

In terms of connectivity, the VMD 6 offers multiple input and output options, including HDMI, SDI, and IP streaming. This ensures compatibility with a wide range of external devices and simplifies integration into existing infrastructures.

Overall, the Technicolor - Thomson VMD 6 stands out as a versatile and powerful video module. Its support for various video formats, advanced compression capabilities, real-time processing features, and user-friendly interface make it an invaluable asset for any organization looking to enhance its video processing and distribution efficiencies. This module represents a significant advancement in video technology, catering to the needs of contemporary media environments.
Top Page Image Contents