Yamaha CDX-496 CD Synchronized Recording, To cancel synchronized CD-tape recording function

CD SYNCHRONIZED RECORDING

This unit can automatically synchronize a tape deck’s recording with CD play. With this function, you can record a CD on tape easily and precisely.

This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to find out whether it is compatible or not.)

*This unit and the tape deck must be placed close to each other so that both of them can simultaneously receive the signals from this unit’s remote control.

3	SYNCHRO	DIMMER	OPEN/	1	REPEAT	RANDOM	4
			CLOSE
	SPACE	TEXT/	PEAK
		TIME			3
	TAPE	CLEAR	PROG
	1	2	3
3	4	5	6
	7	8	9
	0	+I0	INDEX

English

1 Press OPEN/CLOSE to open the disc tray, and load a disc.

OPEN/

CLOSE

2 Load a tape on the tape deck.

*The peak level search function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 20.)

3 Press SYNCHRO.

SYNCHRO

This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode.

*In this state, the time display on this unit flashes on and off.

If necessary, select a desired track by pressing a numeric

button or / ( SKIP/SEARCH ).

5

or

4 Press .

Both CD play and tape deck recording begin.

*CD play begins shortly after the recording.

5 If you want to stop recording temporarily and restart

recording from a desired track, stop this unit by pressing , and the tape deck as well, then follow steps 3–4 again.

To cancel synchronized CD-tape recording function

Press .

Notes

●To finish or stop the recording, make proper operations on the tape deck. (For details, please refer to the owner’s manual of the tape deck.)

●Programmed sequence of tracks can also be recorded with this function instead of recording an entire disc. (Refer to pages 14–15 for the programming procedure.)

●This function can also be used together with the automatic tape-programming function. (Refer to pages 16–19.)

E-21