Yamaha CDX-496, CDX-396 owner manual For Canadian Customers

Page 5

CAUTION: Read this before operating your unit.

English

●To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

●Install your unit in a well ventilated, cool, dry, clean place

— away from windows, heat sources, vibration, dust, moisture, or cold. To avoid humming sounds, locate the unit away from other electrical appliances, motors, and transformers. To prevent fire or electrical shock, do not expose to rain and water.

●Be sure to allow enough spaces for ventilation at the top, on left, right, and back sides of this unit.

●Do not operate the unit upside-down. It may overheat, possibly causing damage.

●Never open the cabinet. If something drops into the set, contact your dealer.

●Do not use force on switches, knobs or cords.

●When not planning to use this unit for long periods of time (i.e., vacation, etc.), disconnect the AC power plug from the wall outlet.

●Grounding or polarization — Precautions should be taken so that the grounding or polarization of the unit is not defeated.

●Do not clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

●Be sure to read the “Troubleshooting” section on common operating errors before concluding that your unit is faulty.

●Do not place another component on top of this unit, as damage or discoloration on the surface of the unit may result.

●To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.

●When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord.

●Do not plug the AC power plug to the wall outlet before you finish all connections.

●The voltage to be used must be the same as that specified on this unit. Using this unit with a higher voltage than that which is specified is dangerous and may result in a fire or other type of accident causing damage. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.

●Sudden temperature changes and storage or operation in an extremely humid environment may cause condensation inside the cabinet.

CAUTION FOR MOVING THE UNIT

Before moving the unit, first remove the disc from the unit, press POWER to turn the unit off, and then disconnect the AC power plug from the wall outlet.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

For Canadian Customers

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

E-1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents CDX-596/496/396 Explanation of Graphical Symbols Safety InstructionsImportant Notice do not Modify this Unit FCC Information for US customers onlyContents For Canadian Customers Discs playable with this unit CD-RW ReWritable Disc Playability Remote control RCA pin cableCoaxial Digital Output CD-TEXT Data Display Capability Refer to page 2 for detailsRemote control operation range Battery installationBattery replacement Connections When the Line OUT analog terminals of this unit are usedNot included RCA pin cable included Shaded part is provided for CDX-596 onlyPower p Power p Auto Display OFF indicator CDX-596 only pRemote control Identification of ComponentsSynchro p TEXT/TIME pDimmer p OPEN/CLOSE p Repeat pBasic Operation Press Power to turn on the powerDisplay information Press or to begin playTo select track number 10 or higher Selected trackTo skip to the beginning of the desired track Skip Search When usingRemaining time of the current track Changing displaysArtist name Total disc play timeChanging brightness of the display To cancel the automatic spacing functionAutomatic spacing During playRANDOM-SEQUENCE Play To cancel random-sequence playRepeat Play To perform random-sequence playDisplay information during programming Program PlayBlinks Press to begin play BlinksIndex Search Off Track Programming for Recording to TapePress to stop the unit Tape 46 turns on, you can check the program data for side a and side B Manual tape-programming When track selection for side a is finished, pressPress Random Follow steps 1 3 onPress . Some other buttons can also be used To cancel the peak level search functionCD Synchronized Recording To cancel synchronized CD-tape recording functionPress OPEN/CLOSE to open the disc tray, and load a disc Load a tape on the tape deckPlay is delayed, or begins at Power is pressedNo sound from the headphones Remote control does notLaser Diode Properties Audio SectionGeneral V492440

CDX-496, CDX-396 specifications

The Yamaha CDX-396 and CDX-496 are distinguished models in the realm of high-fidelity CD players, known for their impressive sound reproduction and thoughtful engineering. Both models reflect Yamaha's commitment to delivering quality audio experiences while adhering to modern technological advancements.

The Yamaha CDX-396 is a compact yet powerful CD player that features a robust construction, ensuring durability and minimizing vibrations that could affect sound quality. One of its standout characteristics is its high-resolution digital-to-analog converter (DAC), which plays a pivotal role in producing a clear and detailed sound. This model supports various CD formats, including CD-R and CD-RW, providing flexibility for users who may have custom disc collections.

Another key feature of the CDX-396 is the programmable playback function, allowing users to create custom playlists. This feature enhances the listening experience, catering to individual preferences and enabling listeners to curate their musical journey. Additionally, it incorporates a user-friendly remote control, offering convenience and ease of access to its various functions without having to physically interact with the player.

On the other hand, the Yamaha CDX-496 builds upon the strengths of its predecessor while introducing several enhancements. The CDX-496 includes an upgraded DAC that further improves sound fidelity and enhances dynamic range, making it an excellent choice for audiophiles seeking rich audio experiences. With its enhanced signal-to-noise ratio, the CDX-496 promises clean and detailed playback, even at lower volumes.

The CDX-496 also features a wider range of connectivity options, including digital output, allowing integration with home theater systems and other audio components. This flexibility makes the CDX-496 a versatile player suited for any audio setup. Furthermore, both models are designed with attention to user experience, featuring intuitive controls and an easy-to-read display that offers essential information such as track number and elapsed time.

In summary, the Yamaha CDX-396 and CDX-496 are exemplary CD players that combine advanced technology, impressive audio quality, and user-friendly features. They cater to both casual listeners and serious audiophiles, ensuring that whether you're enjoying a classic album or a new release, both models deliver an exceptional listening experience that reflects Yamaha's legacy of excellence in audio equipment.
Top Page Image Contents