Hasbro 88-304 manual Lens Cover and Lens Cover Switch, For Best Results, Unloading the Film

Page 2

LENS COVER AND LENS COVER SWITCH

To open the lens cover, slide the lens cover switch to the "open" or “mask” position. Look at the front of the camera and make certain the lens cover does not cover over the lens.

To take a picture using one of the

 

 

backgrounds, slide the lens cover to mask “ “.

 

 

To take a picture without a background, slide

 

 

the lens cover to open “ “.

CLOSE OPEN

MASK

To close the lens cover, slide the lens cover

 

 

switch to the "closed" position. Look at the front of the

camera and make certain the lens is covered and protected from damage.

IMPORTANT NOTES:

1. The lens cover must be opened to take a picture “ “.

2.The lens cover switch must be on mask to take a picture with a background. The special background aperture will appear on the front

of the lens “ “.

FOR BEST RESULTS

1.If you are taking a picture outside, without the flash, try to keep the sun behind you.

2.If you are taking a picture inside, turn on the flash and wait for it to be charged.

3.Hold the camera steady. If necessary, place the camera on a stable surface.

4.Press the shutter button gently so the camera does not move.

5.Don't forget to turn the film advance wheel each time you take a picture.

6.Monitor the film counter window and do not take any pictures when the number in the window matches the film exposures on the film.

UNLOADING THE FILM

When the film counter window matches

the film exposures on the film, the film1 cartridge must be rewound and removed.

3.The lens cover must be closed when the camera is not in use to protect the lens from damage ““.

SHUTTER BUTTON

The shutter button must be pressed down each time you take a picture. Press the button and a slight "click" will be heard to indicate the camera has taken a picture.

To rewind the film, press the rewind release button 1 , unfold the rewind crank 2 , and turn the crank clockwise.

When the film is almost completely rewound, there will be slight tension against the crank. Continue to turn the crank until the tension is released and the entire film is wound onto the film cartridge.

2

IMPORTANT NOTES:

1.The shutter button will not take another

picture if the film advance wheel was not advanced when the previous picture was taken.

2. The shutter button will not function when the film

has reached the end of the film cartridge. Make certain the number of exposures in the film counter window matches the exposures on the film.

3.The shutter button will not function when the background index wheel is not in the correct position.

VIEWFINDER SYSTEM

To open the viewfinder box, press the viewfinder button located on the bottom of the camera. The box will pop up slightly. Pull the box to an upright position.

(see illustration at right)

NOTE: The viewfinder box must be pulled upwards to take a picture.

To take a picture, look through the left hole of the camera. The right hole of the camera does not function.

Close the viewfinder box when the camera is not in use to prevent damage.

When you use the camera to take a picture with an image inserted onto the photo, you will notice a blue area on the left. This area is where the image will appear on the picture. Be careful not to put the subject of your picture inside this area or else it will interfere with the background image.

blue translucent zone

BUILT-IN FLASH and FLASH ON/OFF SWITCH

To turn on the flash, simply slide the flash on/off switch to the ON position. To turn off the flash, simply slide the flash on/off switch to the OFF position.

It takes approximately 8 seconds for the flash to charge after each use. The flash ready light will go on when the flash is ready.

IMPORTANT NOTES:

OFF

ON

1.To take a picture indoors or outdoors with a background, the flash on/off switch must be turned ON and the lens cover must be moved to the open position.

2.To take a picture without a background, use the flash when you are indoors or in poor light conditions.

3.When the camera is set to insert a character onto the photo, the flash is automatically locked into the ON position.

TAKING A PICTURE

1.Install new batteries for best results

2.Load the film

3.Select one of the 6 pre-selected backgrounds or take a picture without a background

4.Open the lens cover

5.Pull the viewfinder box upward to view the object of the picture.

6.Turn on the flash for pictures with a pre-selected background, indoor or poor light conditions.

7.Look into the viewfinder and center the object in the window

8.Press down on the shutter button

9.Turn the film advance wheel clockwise to advance the film

10.The camera is now ready to take another picture

Congratulations - you have taken a picture using the Picture Plus Image Camera!

Open the film compartment, remove the film and bring the film to a film processing center.

CAUTION/DEFAULT OR DAMAGE

Replace battery at the first sign of erratic operation.

If a part of your camera is damaged or something has been left out, DO NOT RETURN THE GAME TO THE STORE. The store doesn’t have replacement parts. Instead, write to us at:

Tiger Electronics, Ltd. Repair Center 980 Woodlands Parkway,

Vernon Hills, Illinois 60061, U.S.A.

Please include a note with your return explaining the problem along with a sales slip, date, place of purchase and price paid. We will do our best to expedite your return promptly.

90-DAY LIMITED WARRANTY

Tiger Electronics, Ltd. (Tiger) warrants to the original consumer purchaser of this product that the product will be free from defects in materials or workmanship for 90 days from the date of original purchase. This warranty does not cover damages resulting from accident, negligence, improper service or use or other causes not arising out of defects in materials or workmanship.

During this 90-day warranty period, the product will either be repaired or replaced (at Tiger’s option) without charge to the purchaser, when returned with proof of the date of purchase to either the dealer or to Tiger.

Product returned to Tiger without proof of the date of purchase or after the 90-day warranty period has expired, but prior to one year from the original date of purchase, will be repaired or replaced (at Tiger’s option) for a service fee of U.S.$17.00. Payments must be by check or money order payable to Tiger Electronics, Ltd.

The foregoing states the purchaser’s sole and exclusive remedy for any breach of warranty with respect to the product.

All product returned must be shipped prepaid and insured for loss or damage to:

Tiger Electronics, Ltd. Repair Dept.

980 Woodlands Parkway, Vernon Hills, Illinois 6006l, U.S.A.

The product should be carefully packed in the original box or other packing materials sufficient to avoid damage during shipment. Include a complete written description of the defect, a check if product is beyond the 90-day warranty period, and your printed name, address and telephone number.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO OTHER REPRESENTATIONS OR CLAIMS OF ANY NATURE SHALL BE BINDING ON OR OBLIGATE TIGER IN ANY WAY. ANY IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE NINETY (90) DAY PERIOD DESCRIBED ABOVE. IN NO EVENT WILL TIGER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM POSSESSION, USE, OR MALFUNCTION OF THIS TIGER PRODUCT.

Some states do not allow limitations as to how long an implied warranty lasts and/or exclusions or limitations of incidental or consequential damages, so the above limitations and/or exclusions of liability may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state.

For more information about Tiger Electronics, our products and special promotions, please visit our Web Site at: www.tigertoys.com

© Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

®, TM, & © 1999 Tiger Electronics, Ltd. All rights reserved.

 

980 Woodlands Parkway, Vernon Hills, Illinois 60061, U.S.A.

 

www.tigertoys.com

PRINTED IN CHINA

Image 2
Contents Selecting a Background Battery InstallationGetting Started To Ensure Proper FunctionFor Best Results Lens Cover and Lens Cover SwitchDAY Limited Warranty Unloading the Film