Blink Detection
The Blink Detection feature is on by default, and after taking each photo, a warning message will pop up if a blink has been detected in the photo.
1.In any Still Shooting modes, press the 
button to enter the photo menu.
2.Switch between different Photo Setup menus and Camera Setup menus using the Left/Right button, and select the
“Blink Detection” setting using the Up/Down button.
3.Use the Right navigation buttons to enter the submenu, and select "On" option.
4.Press the 
button to confirm the setting and exit the menu.
5.Press the Shutter button fully to capture the image. A warning message will be shown on the LCD immediately after detecting someone has blinked in the picture.
A face must be detected by the camera in order for smile detection to function correctly.
For optimal detection results, the subject should be framed to occupy most of the screen space.
37