Hitachi KP-E500 Sub Menu, ･MANUAL preset white balance, ･CHROMA Only KP-DE500 Type, ･Detail

･MANUAL (preset white balance)

◆ ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＭＥＮＵ ◆

>ＭＯＤＥ：ＭＡＮＵＡＬ

Ｒ－ＧＡＩＮ	：	０００
Ｂ－ＧＡＩＮ	：	０００

ＲＥＴ

ＥＮＤ

……Select White Balance mode

……Adjustment of the R gain

……Adjustment of the B gain

……Return to the main menu

……End of menu display

WHITE BALANCE MENU (MODE: MANUAL)

1)Use the UP and DOWN buttons to shift the cursor to “R-GAIN” or “B-GAIN”, then press the SET button. The adjustment value at the right of value flashes.

2)Change the “R-GAIN” or “B-GAIN” by pressing the UP and DOWN buttons. (Variable range: -128～000～+127)

3)Return the factory setting(000) by simultaneously pressing the UP and DOWN buttons for two seconds.

4)The setting is fixed when the SET button is pushed, and the cursor moves below by one line.

29

Sub Menu

The sub menu is used for changing the picture quality (video response) of the camera output image.

1) Press the SET button for longer than 2 seconds to display the “MAIN MENU”.

2) Use the UP and DOWN buttons to shift the cursor to “SUB MENU”, then press the SET button to display the “SUB MENU”.

◆ ＳＵＢ	ＭＥＮＵ ◆
>ＩＴＥＭ	：ＰＩＣＴＵＲＥ		…… Select SUB MENU item
ＣＨＲＯＭＡ	：	０００	…… Chroma setting[*]
ＤＥＴＡＩＬ	：	０００	…… Detail setting
ＰＥＤＥＳＴＡＬ	：	０００	…… Pedestal level setting
ＧＡＭＭＡ	：ＯＮ		…… Gamma setting
ＤＮＲ	：ＡＵＴＯ（ＨＩＧＨ）		…… Digital noise reduction setting
ＰＯＬＡＲＩＴＹ	：ＰＯＳＩＴＩＶＥ		…… Negative/positive
ＲＥＴ			…… Return to the main menu
ＥＮＤ			…… End of menu display
				(*) Note: KP-E500 is not displayed.

SUB MENU (ITEM: PICTURE)

･CHROMA [Only KP-DE500 Type]

The optimum color level has been set at the factory. If necessary, this can be changed as follows.

1)Use the UP and DOWN buttons to shift the cursor to “CHROMA”, then press the SET button. The adjustment value at the right of value flashes.

30

2)Change the “CHROMA” by pressing the UP and DOWN buttons. (Variable range: -128～000～+50)

3)Return the factory setting(000) by simultaneously pressing the UP and DOWN buttons for two seconds.

4)The setting is fixed when the SET button is pushed, and the cursor moves below by one line.

NOTE

1)The color noise might stand out when the color level is raised.

2)CHROMA is fixed to “-128” and cannot be adjusted by the B/W MODE setting at a monochrome image.

･DETAIL

The optimum detail level has been set at the factory. If necessary, this can be changed as follows.

1)Use the UP and DOWN buttons to shift the cursor to “DETAIL”, then press the SET button. The adjustment value at the right of value flashes.

2)Change the “DETAIL” by pressing the UP and DOWN buttons. (Variable range: -128～000～+127)

3)Return the factory setting(000) by simultaneously pressing the UP and DOWN buttons for two seconds.

4)The setting is fixed when the SET button is pushed, and the cursor moves below by one line.