Basic Operation, Loading and Playing Discs

BASIC OPERATION

This manual describes how to operate this unit by using the remote control transmitter.

To operate this unit on the front panel, use the correspond- ing buttons on the front panel.

Loading and Playing Discs

NATURAL SOUND		COMPACT DISC PLAYER
POWER
							DISC		PLAYXCHANGE
PROG	1	2	3	4	5
PHONES					1	2	3	4	5
+10	6	7	8	9	0		OUTPUT LEVEL
					PEAK

DISC SCAN	DISC	SKIP	5
			5
REPEAT		RANDOM

SYNCHRO	DIMMER	OPEN/
SYNCHRO	DIMMER	CLOSE	2,3
	TEXT/		2,3
	TEXT/	PEAK	5
	TIME	PEAK	5
TAPE	CLEAR	PROG
1	2	3
4	5	6
7	8	9
0	—10	INDEX
MODE	— OUTPUT LEVEL —
4
DISC SCAN	DISC	SKIP

1Turn the power on.

POWER

On the front panel

2Open the disc tray and load discs.

Use the disc guides to align the discs correctly in the

tray.

Label side upward

OPEN/

Disc tray

To play an 8-cm (3-inch) CD

Place it in the inner recessed area of the disc tray. Do not put a normal (12-cm/5-inch) CD on top of an 8-cm CD.

3Close the disc tray.

OPEN/

•You can also close the disc tray by pressing the w/d button on the front panel, a DISC-select button on the front panel, a numeric button or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the first selected disc.

4Select a desired disc play mode (1DISC or 5DISCS) confirming it on the display.

MODE

1DISC REP RN

5DISCS S F P SEARCH TITLE ARTIST

Shows the selected disc mode.

“1DISC” mode: The unit will play a designated disc only.

“5DISCS” mode: The unit will play all discs on the tray in sequence.

5Start play from the first track of the disc 1.

*If necessary, select a desired disc by using the DISC SKIP buttons, or a DISC-select button on the front panel.

DISC SKIP		DISC
DISC SKIP

On the front panel

Play will automatically start.

E-8