First Alert 8800 user manual Record

	DVR Settings
	Model 8800 User's Manual
RECORD	Select (checkmark) to trigger immediate motion detection from
	the selected cameras.
ALARM OUT	Select to enable the Alarm Output when motion is detected.
BUZZER	Select to enable the internal buzzer when motion is detected.
EMAIL	Select to send an email, when motion is detected, to the
	indicated address(es), including a snapshot of the event. (See
	information on setting up the list of email addresses.)
UPLOAD	Select to send a message to the browser applet when motion is
	detected. Message will display in the top right corner of the
	browser window. (Requires an established remote connection
	between the DVR and a PC via the Internet.)

VIDEO LOSS HANDLING

Video loss defines the behavior of the DVR if the signal from a camera is lost. Click the

>>button to set the alarm out, buzzer, upload, and email options.

ALARM OUT	Select to enable the Alarm Output when video loss is detected.
BUZZER	Select to enable the internal buzzer when video loss is detected.
UPLOAD	Select to send a message to the browser applet when video loss
	is detected. Message will display in the top right corner of the
	browser window. (Requires an established remote connection
	between the DVR and a PC via the Internet.)
EMAIL	Select to send an email, when video loss is detected, to the
	indicated address(es), including a snapshot of the event. (See
	information on setting up the list of email addresses.)

Note: These options only apply to previously selected camera channels (listed by the column of check boxes.)