DVR Settings
Model 8800 User's Manual
NETWORK
The DVR supports several two options for online viewing after an IP address is set:
DHCP (automatic mode). Acquire the IP address using the DHCP client model.
Static IP (manual mode). Indicate the IP address using the Static IP model (enter data for IP Address, Subnet Mask, and Gateway fields).
Note: Contact your network administrator or Internet service provider for information specific to your network and an explanation of network settings.
HTTP PORT
The HTTP port connects to the DVR web server. By default, the value is 80. You can specify a different port number, if needed.
COMMAND PORT
The command port controls the DVR. By default, the value is 5050. You can specify a different port number, if needed.
MEDIA PORT
The media port is used for audio and video streaming. By default, the value is 6050. You can specify a different port number, if needed.
Note: If the DVR is installed behind a firewall server, the values of the network ports must be set as follows in order to upload to a WAN interface:
HTTP port: 80
Command Port: 5050
Media Port: 6050
Mobile Surveillance Port: 7050
If the DVR is installed behind a router to share a single public IP address, configure the Port Forwarding or Virtual Server for the HTTP, Command, and Media ports:
HTTP port: 80
Command Port: 5050
Media Port: 6050
Mobile Surveillance Port: 7050
44