5. Wire Connection
Termination Board
Micro Switch for Alarm trigger
|
|
| Power In | |
|
| GND | DC12V (+) or AC24V | |
| Alarm COM |
| ||
| Video | Power In | ||
| Alarm NO |
| ||
V. Phase Adjustment VR | Alarm NC | AC12V | ||
| ||||
|
|
|
Figure 7
Connect the power supply cable (AC24V/DC12V), video output and alarm output to the proper connectors shown as Figure 7.
The V. Phase adjustment screw is located on the termination board. The vertical phase may require adjustment to synchronize the vertical phase of the camera with other camera in the system when it is to be used in the
7