Mounting the base | EverFocus EHD320 specs

3. Mounting the base.

Side conduit entry

Back conduit entry	Conduit plug setscrew

Mounting Setscrew

Mounting Setscrew	Mounting Setscrew
Mounting Setscrew
	Figure 4

Attach the base to the wall or ceiling, fix the base by the 4 setscrews attached in the accessory pack. The dome is weighted 1.7kg, please make sure if the mounting is strengthened enough to support it, if not,

please reinforce the mounting according to the environment. Note: The diameter of the screw hole isψ4.7mm.

Back conduit entry (PF1/2)

Conduit plug

Side conduit entry (PF1/2)

Figure 5

The camera comes with a conduit plug pre-installed in the PF 1/2 conduit entry on the side. The screw can be removed and installed in the back conduit entry. Loosen the conduit plug setscrew (as shown in Figure 5) before removing the conduit plug.

Caution: To prevent moisture leaking into the housing, apply an appropriate gasket or sealant around the conduit connection.