Power Source | 12VDC/24VAC | |
| 24VAC: 6VA max. (Heater OFF) | |
Power Consumption | 24VAC: 20.5VA max. (Heater ON) | |
12VDC: 4W max. (Heater OFF) | ||
| ||
| 12VDC: 11.5W max. (Heater ON) | |
Dimensions | 130mm(W) x 98.8mm(H) x 130mm(D); | |
5.1"(W) x 3.9"(H) x 5.1"(D) | ||
| ||
Weight | 1.7kg ; 3.7lbs | |
Operating Temperature | ||
Certifications | FCC/CE | |
|
|
DIMENSIONS
INSTALLATION
1.Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure 1). Carefully uncap the housing cover as the direction shown below (Figure 2), please pay attention not to damage the lens. To remove the housing cover, push the hinges to the bottom of the bracket, the hinges can be easily removed from the bracket.
3 | Figure 2 |