EverFocus EHD525EX specifications Back conduit entry PF1/2

Page 6

Attach the base to the wall or ceiling, fix the base by the 4 setscrews attached in the accessory pack. The dome is weighted 1.7kg, please make sure if the mounting is strengthened enough to support it, if not, please reinforce the mounting according to the environment.

Note: The diameter of the screw hole isψ4.7mm.

Back conduit entry (PF1/2)

The camera comes with a conduit plug pre-installed in the PF 1/2 conduit entry on the side. The screw can be removed and installed in the back conduit entry. Loosen

the conduit plug setscrew (as shown in

Conduit plug

Side conduit entry (PF1/2) Figure 5

Figure 5) before removing the conduit plug.

Caution: To prevent moisture leaking into the housing, apply an appropriate gasket or sealant around the conduit connection.

5

Image 6
Contents Precautions Do not install the camera near electric or magnetic fieldsFeatures Package ContentsPreface Specifications Dimensions Installation 12VDC/24VACPage Back conduit entry PF1/2 Page Wire Connection Termination Board Page Page Page DIP Switch Function Vari-Focal Lens LL Line-Lock OFF/ONAGC Automatic Gain Control OFF/ON BLC Back Light Compensation ON/OFF Iris Level AdjustmentIris ALC Adjustment FL Flickerless Function ON/OFFSimple Instructions for the Desiccant Pack China Office Head OfficeUSA L.A. Office USA N.Y. Office Europe Office Japan Office