Operation Instruction
♥2008 EverFocus Electronics Corp
Please read this manual first for correct installation and operation. This manual should be retained for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice.
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or
by any means without written permission of the EverFocus Electronics Corporation.
Precautions
1.Do not place any object on top of the cover.
2.Be careful when handling the camera, do not drop it or subject it to strong shock or vibration to prevent any damages to it. Do not disassemble it or place it on an unstable base.
3.Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers because the magnetic fields generate from above devices will distort the video image.
4.Install the camera away from stoves, or other heat generating devices as the high temperature could cause deformation, discoloration or other damages of the camera. Install the camera at where the temperature range will stay between 0°C to 50°C (32°F to 122°F).
5.Never aim the camera at the sun or other extremely bright objects whether it is in use or not.
6.Do not touch the surface of CCD sensor by hand directly. Use a soft cloth to remove the dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the CCD sensor and the camera lens. When the camera is not in use, put the cover cap on the lens mount.
7.All warnings on the products and in the operating instructions should be adhered to.
8.Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.
9.Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be abused by persons walking on it.
10.Do not overload wall outlets and extension cords as this can result in fire or electric shock.
11.Never push objects of any kind into his appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock.
12.Refer all work related to the installation of this product to qualified service personnel or system installers.