PC Mode, To Play Mode | DXG Technology DXG-308 specification

※If the "Memory is not enough!" warning message appears on the LCD Monitor, the memory card is full.

In Play Mode, users can review recorded stills and movies. To review:


1.	Turn the Mode Dial		to Play Mode .
2.	Turn on the camera. The most recently recorded image
	appears on the LCD monitor.
3.	Press the arrow buttons		/ on the Multi-Select
Button		to review the previous and back image.


4.	Press the	button on the center of the Multi-Select

Button button to enable the "Delete", "Slideshow" and "DPOF" functions.

5. Press the arrow button on the Multi-Select Button to enter the selected menu items.

6.Press the arrow button on the Multi-Select Button to exit the menu.

※The DPOF function can only used with a memory card inserted.

※If there is no image stored in the internal memory or

memory card, a “No picture” message pops up on the LCD Monitor in the Play Mode.

※ Press the Display Mode Button to review the

images when the camera is powered off. Press the Display Mode Button again to turn off the LCD Monitor.

Use Movie Mode to record moving pictures (no audio). To record movies:

2.Turn on the camera. When the camera is on, the last image recorded appears on the LCD monitor.

3.Press the Shutter button to start recording. Press the Shutter button again to stop recording.

4.The LCD Monitor will show the recorded time (seconds) while you are recording the movie pictures.

zThe maximum recording time depends on the amount of memory card space available.

6-5 PC Mode

zUse PC Camera or Mass Storage items in the PC Connection menu:

1. Turn on the camera and turn the Mode Dial to PC.