3.4.1Setting the date and time
Please refer to the section 2.6.1 “Setting the date and time”.
3.4.2Setting the beep function
1.Turn the camera on, and use joystick (Left/Right button
) to System icon, and then press OK 
to enter Setup mode.
2.Use the joystick (Up/Down button 
) to select the Beep option. The screen appears as below.
3.Use the joystick (Left/Right button 
) to select Beep On or Beep Off, and press the OK 
to confirm.
4.Press the joystick (ENTER button 
) or Mode button to leave the menu.
3.4.3Setting the language
Please refer to the section 2.6.2 “Setting the language”.
3.4.4Auto Display Off
Use the auto power off function to set a period of inactivity after which the camera will switch the LCD screen off.
1.Turn the camera on, and use joystick (Left/Right button
) to System icon, and then press OK 
to enter Setup mode.
2.Use the joystick (Up/Down button 
) to select the Auto Display Off option. The screen appears as below.
3.Use the joystick (Left/Right button 
) to select 30s, 60s, DEMO, OFF and press the OK
to confirm. If the option is set to DEMO, the camera will automatically play the movie and picture files in the DEMO folder repeatedly after 30 seconds. It’s the same as the screensaver.
4.Press the joystick (ENTER button 
) or mode button to exit the menu.
33