3.4.7TV Standard
Use the TV option to set up the applicable local TV system.
1.Turn the camera on, and use joystick (Left/Right button
) to System icon, and then press OK 
to enter Setup mode.
2.Use joystick (Up/Down button 
) to select the TV Standard option. The screen appears as below.
3.Use the joystick (Left/Right button 
) to select NTSC/PAL, and press the OK 
to confirm.
4.Press the joystick (ENTER button 
) or Mode button to leave the menu.
3.4.8Default
Use this option to reset all settings to the factory default.
1.Turn the camera on, and use joystick (Left/Right button
) to System icon, and then press OK 
to enter Setup mode.
2.Use the joystick (Up/Down button 
) to select the Default 選option, and the screen
appears as below. Press the OK 
to use the joystick (Left/Right button 
) to select 
or 
.
3.Press the OK 
to confirm.
4.Press the joystick (ENTER button 
) or mode button to leave the menu.
3.4.9Memory Status
1.Turn the camera on, and use joystick (Left/Right button
) to System icon, and then press OK 
to enter Setup mode.
2.Use joystick (Up/Down button
) to select the Memory Status option. The screen appears as follow. Press OK 
to enter to display the current storage status.
35